Vishay
- One Greenwich Place
Shelton, CT
06484
United States
06484
United States of America - 001-402-563-6866
- http://www.vishay.com
- 001-402-563-6296
Vishay has grown through acquisitions to include such top names as Dale, Sfernice, Draloric, Sprague, Vitramon, Siliconix, General Semiconductor, BCcomponents, and Beyschlag. Vishay's portfolio of brands represents an unmatched collection of discrete semiconductors and passive components. All of these brands and products are part of one global manufacturer: Vishay.
Vishay Articles
Dual inductor cuts component count in Class D amplifiers
A new Automotive Grade low profile, high current dual inductor in the 2525 case size has been introduced by Vishay Intertechnology.
Vishay SiRA99DP P-Channel MOSFET for high efficiency
Vishay Intertechnology has introduced a -30V p-channel power MOSFET to offer on-resistance of 1.7mΩ at ten volts. With its low on-resistance and 6.15 by 5.15mm thermally enhanced PowerPAK SO-8 single package, the Vishay Siliconix TrenchFET Gen IV SiRA99DP is purpose-built to increase power density.
Capacitors get DLA drawing 20001 approval
Vishay Intertechnology says that its tantalum capacitors division is now an approved source for DLA drawing 20001 wet tantalum capacitors.
Energy storage capacitors offered in smaller case sizes
Vishay Intertechnology’s ENYCAP electrical double-layer energy storage capacitors for energy harvesting and power backup applications are now available in seven smaller case sizes.
Automotive-grade resistors offer TCR down to ± 2 ppm/K
Vishay Intertechnology has extended its TNPU e3 series of Automotive Grade ultra-precision thin film flat chip resistors with lower temperature coefficient of resistance (TCR) down to ± 2 ppm/K in the 0603, 0805, and 1206 case sizes.
Chip resistors offer resistance values up to 10MΩ
Vishay Intertechnology has enhanced its MC AT precision series of Automotive Grade thin film chip resistors with a wider range of resistance values from 47Ω to 10MΩ in the 1206 case size.
Automotive grade capacitors aid design flexibility
Two new series of Automotive Grade, surface-mount aluminum electrolytic capacitors that combine high voltages up to 450V with operating temperatures up to +125 °C have been introduced by Vishay Intertechnology.
Wireless charging coils replace end-of-life devices
Powdered iron-based, WPC-compliant (Wireless Power Consortium) wireless charging coils that offer direct replacements for devices for which end-of-life (EOL) was announced in 2017 have been released by Vishay Intertechnology.
Snap-in capacitors offer ripple currents up to 5.05A
A new series of miniature snap-in power aluminium electrolytic capacitors that enables higher power density designs has been introduced by Vishay Intertechnology.
Jumper chip cuts component temperature by over 25%
A thin film device that allows designers to transfer heat from electrically isolated components by providing a thermal conductive pathway to a ground plane or common heatsink has been released by Vishay Intertechnology.
Ultra-precision thin film flat chip resistors save space
Vishay Intertechnology has announced that the company has extended its TNPU e3 series of Automotive Grade ultra precision thin film flat chip resistors with a new space-saving component in the compact 0402 case size.
Phototransistor optocoupler saves energy and space
An Automotive Grade phototransistor optocoupler that combines a high current transfer ratio (CTR) range from 50% to 600% with a low forward current of 1mA in the compact SOP-4 mini-flat package has been introduced by Vishay Intertechnology.
Automotive grade inductor reduces power losses
An IHDM Automotive Grade edge-wound, through-hole inductor with rated current up to 150 A for under the hood applications has been released by Vishay.
Chip resistors arrive in space-saving package
The TNPU e3 series of Automotive Grade ultra-precision thin film flat chip resistors from Vishay Intertechnology has been extended with a new space-saving component in the compact 0402 case size.
Vishay shows full hand at New Orleans event
Power IC, passive component, diode, and MOSFET technologies for a wide range of applications including the automotive market will be shown by Vishay at APEC 2020 in New Orleans (March 15-19).
High power resistors meet AEC-Q200 qualification
High power resistors with the AEC-Q200 automotive qualification are the first on the market according to Vishay Sfernice, the manufacturers.
FRED recovery rectifiers presented in 0.9mm profile
Eight new 100V and 200V devices in the eSMP series SlimSMAW (DO-221AD) package with a low 0.9 mm profile have been added to Vishay Intertechnology’s FRED Pt Ultrafast recovery rectifiers.
MOSFET offers RDS(ON) of 3.5mΩ in 3mm x 3mm package
A -30V p-channel TrenchFET Gen IV power MOSFET that offers on-resistance of 3.5mΩ at 10V in the 3.3mm by 3.3mm thermally enhanced PowerPAK 1212-8S package has been introduced by Vishay Intertechnology.
MOSFET offers on-resistance times gate charge
Vishay Intertechnology has introduced a new 80V TrenchFET Gen IV n-channel power MOSFET in the 6.15 by 5.15mm PowerPAK SO-8 single package. Designed to save energy by increasing the efficiency of power conversion topologies and switching circuitry, the Vishay Siliconix SiR680ADP offers on-resistance times gate charge, a key figure of merit (FOM) for MOSFETs used in power conversion applications of 129 mΩ*nC.
80V MOSFET on-resistance times increase efficiency
An 80 V TrenchFET Gen IV n-channel power MOSFET in the 6.15mm by 5.15mm PowerPAK SO-8 single package has been introduced by Vishay Intetechnology. Designed to save energy by increasing the efficiency of power conversion topologies and switching circuitry, the Vishay Siliconix SiR680ADP offers on-resistance times gate charge — a key figure of merit (FOM) for MOSFETs used in power conversion applications — of 129 mΩ*nC.