Power

Displaying 451 - 460 of 486

Robust automotive-grade buck regulator ICs with wide input voltage range

The new A8582 and A8583 from Allegro MicroSystems Europe are robust automotive-grade buck regulator ICs with high switching frequency and output current and a wide input voltage range. Each device integrates a low-resistance high-side N-channel MOSFET, and incorporates current-mode control to provide excellent loop stability and transient response.
28th April 2011

IR Introduces Automotive DirectFET®2 Power MOSFET Chipset Optimized for DC-DC Applications Requiring High Power Density and Efficiency

IR Introduces Automotive DirectFET®2 Power MOSFET Chipset Optimized for DC-DC Applications Requiring High Power Density and Efficiency
International Rectifier today announced the introduction of an automotive DirectFET2 power MOSFET chipset optimized for DC-DC applications used in internal combustion engine (ICE) cars, hybrid and electric vehicles.
28th April 2011

Delphi Showcases Innovative Wireless EV Charging

Delphi Automotive has equipped an electric vehicle with its Delphi Wireless Charging System, a highly efficient wireless energy transfer system featuring technology developed by WiTricity Corporation.
27th April 2011


Axeon to reduce size, weight and cost of EV & Hybrid vehicle batteries

Axeon has been awarded research funding from the EU to dramatically reduce the weight, volume and cost of batteries in electric and hybrid vehicles as part of a consortium programme called SmartBatt.
26th April 2011

Microcontroller based – digitally controlled DC Load Electronic DC Load

Zentro-Elektrik is announcing topically with its electronic DC load series DCL3000 a load for highest demands.
20th April 2011

Cost-effective Passenger Car Hybridization With ZF

The project team supported by the Federal Ministry of Economics and Technology works on integrating hybrid power electronics into the transmission. This will make hybridization of volume production vehicles easier and more cost-efficient spanning all manufacturers.
20th April 2011

IR’s New Family of Automotive-qualified MOSFETs Offers Rugged, Compact System Solution

International Rectifier today introduced a family of rugged automotive qualified MOSFETs for a range of applications used in Internal Combustion Engine (ICE) and hybrid vehicle platforms. Utilizing IR’s proven planar technology, the new MOSFET devices are available in an SO-8 package. Comprising both single and dual N and P channel devices, in addition to N and P channel devices integrated into a single package, the new family offers a rugged, compact system solution for driving multiple outputs or half-bridge circuits in automotive applications.
20th April 2011

Powerstax Introduce 3000w Ruggedised Rack Mount DC-DC Power Supply

Powerstax Introduce 3000w Ruggedised Rack Mount DC-DC Power Supply
Latest news from Powerstax is the introduction of the TVR3001, a 3000W DC-DC power conversion rack that has been developed specifically for harsh environmental conditions. In a highly efficient configuration, each of the three individual modules within the rack contain two of Powerstax’s versatile F501 full brick DC-DC converters, coupled with a two phase boost converter to provide a standalone power solution. The Powerstax TVR3001 is ideal for use in vehicle or remote applications and the system is designed to protect the internal electronics from the ingress of dust.
20th April 2011

Vishay Launches New Low-Profile, Surface-Mount Avalanche Rectifiers with 20 mJ EAS

Vishay Intertechnology, Inc. today introduced nine new series of low-profile, surface-mount standard, fast, and ultrafast avalanche rectifiers with 20 mJ EAS avalanche capability and industry-high forward currents up to 4 A in compact, space-saving SMP and SMPC packages.
19th April 2011

Vishay Intertechnology Releases Industry’s First Green, RoHS-Compliant (Without Any Exemptions) Thick Film Rectangular Chip Resistor in 0603, 0805, and 1206 Case Sizes

Vishay Intertechnology, Inc. today introduced the industry’s first green, RoHS-compliant (without any exemptions) thick film rectangular chip resistor. Offering a completely lead (Pb)-free resistor body with pure tin solder contacts and a metal glaze on a high-quality ceramic, the RCG e3 is AEC-Q200 qualified and provides stability of 1 % for 1,000 hours at + 70 °C in three case sizes.
13th April 2011


Power documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

embedded world 2018
27th February 2018
Germany Nuremberg
Industry 4.0 Summit 2018
28th February 2018
United Kingdom Manchester
Factories of the Future Expo 2018
28th February 2018
United Kingdom Manchester
Power supply design seminar 2018
1st March 2018
United Kingdom
coNEXTions Technology Day 2018
8th March 2018
United Kingdom Coventry