Vector Informatik GmbH

Address:
Ingersheimer Str. 24
Stuttgart


D 70499
Germany

Phone: +49 (0)711-80670-0

Fax: +49 (0)711-80670-111

Web: www.vector.com


Vector Informatik GmbH articles

Displaying 1 - 20 of 29

Making automotive Ethernet conformance tests easy with CANoe

Making automotive Ethernet conformance tests easy with CANoe
Ethernet conformance of automotive ECUs is now easier and more efficient for developers and system integrators. The current Version 12.0 of CANoe, the development and test tool from Vector, now supports conformance tests defined by Technical Committee 8 (TC8) of the OPEN Alliance. The tests are implemented so that their execution is primarily automated; this enables ideal integration into the development process.
12th June 2019

Platform meets the demands of current automotive trends

Platform meets the demands of current automotive trends
Vector simplifies the introduction of AUTOSAR Adaptive: The model-based E/E development environment PREEvision comprehensively supports users in expanding existing software and hardware architectures with the capabilities of the AUTOSAR Adaptive Platform. AUTOSAR Adaptive expands the AUTOSAR platform to meet the demands of current automotive trends like autonomous driving, electrification and connectivity.
28th May 2019

Software tool speeds development of AUTOSAR-4 projects

Software tool speeds development of AUTOSAR-4 projects
vVIRTUALtarget is a tool for virtual testing of AUTOSAR ECUs from Vector. It enables faster software development implementations in typical AUTOSAR-4 projects. The virtualised environment makes it possible to test the ECU software throughout the development process. Users benefit from rapid test execution that can be even faster than in real time.
22nd November 2018


Make the switch to service-oriented E/E architectures

Make the switch to service-oriented E/E architectures
The PREEvision 9.0, the next release of the software tool for developing distributed systems in the automotive industry and related areas, has been introduced by Vector. The model-based development environment is fully equipped for AUTOSAR Adaptive and offers extended SysML and UML functions to model service-oriented architectures.
4th September 2018

Simplifying the measurement of ECUs and ADAS sensors

Simplifying the measurement of ECUs and ADAS sensors
In the new version of its CANape measurement and calibration tool, Vector integrates many new functions. In this way, calibration engineers can simplify their work and interactions with their ECUs. The storage of configuration files in containers accelerates important project transfer operations. Improvements have also been made in the field of ADAS development, in particular for the visualisation of LIDAR sensor data.
13th February 2018

Vector Informatik acquires Timing-Architects

Vector Informatik acquires Timing-Architects
  Timing-Architects Embedded Systems GmbH (TA) has been acquired by Vector Informatik. The Stuttgart-based specialist for automotive embedded electronics will now offer its customers an even more comprehensive portfolio in the field of multi-core real time systems.
17th January 2018

Guiding the developer step by step through design process

Guiding the developer step by step through design process
Vector provides developers with comprehensive support for the integration of Ethernet networks in vehicles as well as for the build-up of service-oriented software architectures. No matter if CAN or FlexRay are to be extended, partly replaced or if new use cases are to be developed. With the design tool PREEvision Ethernet networks or clusters can be described comprehensibly, clearly and from scratch.  
19th December 2017

Infrastructure for ADAS algorithm development expanded

Infrastructure for ADAS algorithm development expanded
Version 2.5 of vADASdeveloper from Vector provides comprehensive support for developers of multisensor applications for ADAS and automated driving. Through graphical configuration of object information Vector's tool quickly and easily visualises sensor data. Users get new display windows and can integrate reference lidar systems in order to simplify the interpretation of object data and the results of fusion.
6th October 2017

Run-time software receives certification for ISO 26262

Run-time software receives certification for ISO 26262
  As of 21st August 2017, the AUTOSAR Run-time Environment (RTE) from Vector fulfills the requirements of ISO 26262 up to ASIL D. exida – an internationally recognised specialist in functional safety. By using the new RTE, ECU developers can avoid much of the effort required to qualify the generated RTE for safety-related applications.
31st August 2017

Tool enables flexible data exchange in E/E engineering

Tool enables flexible data exchange in E/E engineering
Manufacturer of software tools and components for the development of electronic systems, Vector Informatik, has released PREEvision 8.5 which supports additional industry standards for flexible data exchange in E/E engineering. The current release allows for importing and exporting the exchange formats ReqIF and KBL 2.4. Thus, Vector Informatik once again facilitates cooperation between manufacturers and suppliers in the model-based development of distributed embedded systems.
11th August 2017

Diagnostic configuration at the press of a button

Diagnostic configuration at the press of a button
With version 8.5 SP2 of CANdelaStudio, Vector presents a solution for the creation of AUTOSAR-compliant configurations of the diagnostic basic software for vehicle ECUs. It enables development teams at vehicle and ECU manufacturers to generate AUTOSAR Diagnostic Extract (DEXT) files at the press of a button. AUTOSAR DEXT is a new extension of the AUTOSAR system description.
7th February 2017

Experts look at the future of automotive electronics

Experts look at the future of automotive electronics
Rapidly evolving technology in the automotive market - from autonomous cars and advanced ADAS systems, to truck platooning and vehicle networking - means that many consumers are unsure about what the future holds for the modern day motorists.
20th December 2016

Software upgrade optimises calibration of ECU parameters

Software upgrade optimises calibration of ECU parameters
In Version 15.0, Vector is extending its CANape measurement and calibration tool with many new functions. Its scalable, decentralised recorder solution makes it possible to reliably capture very high bandwidth measurement data rates of over 1 GByte/s, such as those that occur in the ADAS field. The tool’s advanced user operation concept – with an intuitive menu ribbon that is structured according to feature sets – makes it easy to quickly access frequently used functions.
20th December 2016

Investment enables development of multi-core ECU systems

Investment enables development of multi-core ECU systems
Stuttgart-based Vector Informatik (Vector) has invested in Timing-Architects Embedded Systems (TA). Together they now offer a complete tool chain for developing distributed multi-core real-time systems for Electronic Control Units (ECU) in vehicles. Vector is also enabling global sales of TA products. 
19th October 2016

An aid to automotive architecture design

An aid to automotive architecture design
The IT industry for years has been using Service-Oriented Software Architectures (SOA) to describe and structure distributed systems. In the automotive industry, this procedure is also increasing in importance, in order to meet technical challenges associated with things like autonomous driving and V2X communication.
8th August 2016

Efficient development of multi-sensor applications

For the development of algorithms for ADAS and automated driving, version 2.0 of the vADASdeveloper software tool offers comprehensive support. It offers ADAS developers a complete solution, ranging from multi-sensor data recording to quick visualisation of results. Even algorithm development along with implementation in simulation and testing systems can be realised in this way.
2nd June 2016

Getting the most out of measurement data

Getting the most out of measurement data
A number of new functions have been added to the new version 14.0 of vSignalyzer from Vector. Electronic developers will now be able to benefit from a range measurement data visualisation functions for manual and automated analysis.
18th December 2015

Vector Technology Days - tech you can touch

Vector Technology Days - tech you can touch
On 28 and 29 October 2015, Vector Technology Days will have their premiere at Motorworld in Böblingen, Germany. In a fittingly automotive ambience with 1000 m² of floor space, the high-tech company will present forward-looking technologies that you can touch. Vector is opening up its development labs and will demonstrate the latest product developments.
1st September 2015

Tool simplifies multi-sensor application development

Tool simplifies multi-sensor application development
A tool for developing multi-sensor applications, vADASdeveloper, has been introduced by Vector Informatik. Having been adopted by BASELABS earlier this year, developers of ADASs and ECUs for automated driving can benefit from a comprehensive solution for data fusion and environment perception.
11th February 2015

Vector enters South American market

Vector Informatik is opening its 11th foreign subsidiary, with the founding of Vector Brazil. Vector Brazil will market the entire product line-up for automotive electronics in South America. Electronics developers in South America will now receive intensive support in close co-operation with the company's headquarters in Stuttgart.
7th November 2014


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

ELIV 2019
16th October 2019
Germany Bonn World Conference Center