Encapsulated railway converters with pure convection cooling

Posted By : Alex Lynn
Encapsulated railway converters with pure convection cooling

The RWY 200-HSA-P2 series of fully encapsulated railway quality DC/DC converters with pure convection cooling have recently been released by ABSOPULSE Electronics. The 200W converters deliver a single, regulated output of 12, 24, 36, 48 or 110Vdc. They accept inputs of 24, 36, 48, 72 or 110Vdc with EN50155 wide input ranges.

The RWY 200-HSA-P2 units are cooled by a heatsink assembly attached to their under-surface. This enables operation over a -40 to +55oC temperature range without derating. Wider temperature ranges are available on request. The assembly can be mounted to a chassis or DIN-rail. The chassis-mounted option is suitable where a heatsinking surface is not available to provide sufficient conduction cooling.

The heatsink assembly also allows for mounting on thermally non-conductive surfaces such as wood, plastic and brick walls. All RWY 200-HSA-P2 units are shipped with DIN-rail clips, providing customers with both chassis and DIN-rail mounting options.

The converters are fully encapsulated with a thermally conductive MIL-grade silicon rubber compound with a UL94V-0 flammability rating. Encapsulation ensures protection from high levels of shock and vibration, moisture, dust, salt fog and other contaminants.

The units meet the requirements of EN50155 for electronic equipment used on railway rolling stock. They are equipped with heavy filtering on the input and output and comply with EN50121-3-2. They also meet EN61000-4-2, EN61000-4-3, EN61000-4-4 and EN61000-4-6. Other protection includes 3000Vdc input-output isolation, overload protection, thermal protection and current limiting.


You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

ELIV 2019
16th October 2019
Germany Bonn World Conference Center