Robust Three-Axis Sensor In Engine Compartment

4th December 2012
Posted By : ES Admin
Robust Three-Axis Sensor In Engine Compartment
The new Bosch SMI650 combined inertial sensor is designed to cope with the harsh environment found in a car’s engine compartment. It can withstand operating temperatures of up to +140 °C and is able to deal with even strong broadband vibrations thanks to a special vibration damper. This is the first time that an electronic control unit for the ESP electronic stability program has featured a sensor with integrated vibration damper. ESP electronic control units with integrated inertial sensors have no need for complicated wiring to connect to external sensors. A biaxial acceleration sensor (ay and az) and a monoaxial yaw sensor (Ox) together give the SMI650 fully fledged ESP senses for monitoring a vehicle’s three axes of motion. The first series-production version of the new combined inertial sensor will be incorporated in Bosch’s current generation 9 ESP electronic control units.
Keeping the sensor elements free of interference

The current trend in automotive sensor technology is to use combination sensors. This makes sense because integrating various sensor elements in one housing makes their handling, fitting, and electrical connections considerably more straightforward – with a resulting reduction in costs. But a combination sensor such as the SMI650 has to be able to cope with more challenging conditions, since it has to make the transition from the comfort of the passenger compartment to a car’s “torture chamber”: the engine compartment. Here, temperatures can swing wildly from way below freezing to way above the boiling point of water, while the sensors must avoid misinterpreting the strong vibrations caused by a huge variety of engine types as unstable driving conditions. In order to shield the SMI650’s sensor elements against such sources of interference, the PM28D sensor housing has been fitted with a vibration damper. Its base plate is enveloped in a specially developed silicone material, isolating the sensors from background vibrations. But that is not all: Bosch engineers have also provided the tiny acceleration sensor structures with micromechanical dampers. Together with the optimized component’s own ASIC an up to now unmatched robustness of the sensor was realized. Therefore it is well suited for the integration in units.



Background: the ESP® electronic stability program

A microcomputer in the ESP® electronic control unit monitors the signals transmitted by the ESP® sensors and compares the driver’s steering input to the vehicle’s actual motion 25 times every second. If the values diverge, the ESP® reacts in a flash, applying metered braking to generate the counteracting force necessary to ensure the vehicle continues to follow the driver’s steering input to the extent physically possible. Bosch launched ESP® in 1995, and the sensors that measure yaw rate and lateral acceleration were first integrated into the electronic control unit in 2008. Up to then, they had been fitted separately within the passenger compartment.

##IMAGE_2_C##

You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SPS IPC Drives 2019
26th November 2019
Germany Nuremberg Messe
Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi