ROHM Introduces New Step-down Switching Regulators with Built-in Power MOSFET

Posted By : ES Admin
ROHM Introduces New Step-down Switching Regulators with Built-in Power MOSFET
ROHM Semiconductor has announced new step-down switching regulators with a built-in 800mΩ Power MOSFET. The BD9G101G series provides 0.5A DC output with excellent line and load regulation for smart power management in a small SOT23 (SSOP6) package. The operating frequency is fixed at 1.5MHz, allowing the use of a small inductor and a ceramic capacitor in order to reduce space requirements. All phase compensation components are integrated as well.
The input voltage can vary from 6 to 42V, the internal reference voltage is set to 0.75V with an accuracy of typical ±1.5%. Ideally suited to facilitate step-down switching designs, the new device offers first-rate thermal resistance and multiple protection features such as internal over current protection, under voltage locked out and thermal shutdown . The operating temperature spans from -40°C to +105°C while the maximum junction temperature lays at 150°. Areas of deployment are industrial distributed power and automotive applications, battery powered equipment and medical OA instruments.

Key Features
・ High and Wide Input Range (VCC=6V~42V)
・ 45V/800mΩ Internal Power MOSFET
・ 1.5MHz Fixed Operating Frequency
・ Feedback Pin Voltage 0.75V±1.5%
・ Internal compensated
・ Internal Over Current protection, Under Voltage Locked Out, Thermal shutdown
・ 0μA Shutdown Supply Current
・ 6-Lead SOT-23 package(SSOP6)

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EVS32
19th May 2019
France EUREXPO LYON
ELIV 2019
16th October 2019
Germany Bonn World Conference Center