Mobile power station offers intelligent energy management

Posted By : Barney Scott
Mobile power station offers intelligent energy management

With the MIP-500, IPETRONIK is announcing a mobile power station with intelligent energy management for independent on-board supply of measurement systems in the automotive sector. The unit is being presented at the Automotive Testing Expo Europe in Stuttgart. The 12V lead-fleece high-performance battery offers a capacity of 75Ah and is used in all applications where it is necessary to ensure an independent supply for the measurement technology deployed.

Accordingly, it is suitable for applications in both electric and hybrid vehicles as well as in conventional vehicles with a combustion engine. Particularly however for electric and hybrid vehicles it is necessary to ensure that the installed measurement technology does not affect the test vehicle's electrical system and its energy management.

With the MIP-500, IPETRONIK has therefore developed a mobile power station that decouples the automotive on-board electrical network from the measurement technology power supply. It supports both the stationary AC charging mode (230V mains supply) as well as the DC charging mode (on-board supply) of the built-in high-performance battery. The charge controller deployed allows the current used by the on-board supply for charging to be controlled in two stages. The electronics also prevent feedback from the 12V lead-fleece high-performance battery to the vehicle's own battery.

By evaluating CAN signals, the integral, programmable controller allows the DC charging mode to be enabled/disabled, such that it is possible to program for example that DC charging can only take place in a hybrid vehicle when the combustion engine is running. Thanks to the high charging current in AC mode, the power station is fully charged after a short charging time.

Further features include the control of charge current of vehicle battery, the programmable CAN interface for vehicle bus communication, the ruggedized design for automotive applications and the mounting kit for individual in-vehicle assembly. The power station specified in accordance with IP code 21 (ISO 20653 - 2013) measures 1000x300x350mm and weighs 50kg. It has a working temperature range of -20 to +50°C. It requires a voltage supply of 85 to 265VAC and/or the 12VDC on-board power supply. The power consumption is typically around 1020W.


You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi
The Sensor Show 2020
16th June 2020
Germany Messe Munich