Miniature automotive MOSFETs bring increased power density

23rd September 2019
Posted By : Alex Lynn
Miniature automotive MOSFETs bring increased power density

Diodes Incorporated announced the introduction of the 40V-rated DMTH4008LFDFWQ and 60V-rated DMTH6016LFDFWQ automotive-compliant MOSFETs packaged in DFN2020. These miniature MOSFETs occupy just ten percent of the PCB area of larger packages, such as SOT223, enabling greater power density in DC/DC converters, LED backlighting, ADAS, and other ‘under-the-hood’ automotive applications.

The DMTH4008LFDFWQ has a typical RDS(ON) of 11.5mΩ at VGS = 10V and a gate charge, Qg, of just 14.2nC. The DMTH6016LFDFWQ has a typical RDS(ON) of 13.8mΩ at VGS = 10V and a Qg of 15.2nC. Similarly, both devices are qualified to 175°C and packaged in the sidewall plated DFN2020, making them suitable for use in high ambient temperature environments.

When used in a typical application, such as a 12V and five amp buck converter, the DMTH4008LFDFWQ dissipates 20% less power than comparable competitor MOSFETs. This significant improvement in efficiency provides automotive designers with greater flexibility and the freedom to increase power density in new or existing automotive applications.

The DMTH4008LFDFWQ and DMTH6016LFDFWQ are automotive-compliant to AEC-Q101 and supported by PPAP for full traceability. They are available now priced at $0.20 and $0.26 each, respectively, in 3000 piece quantities.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

ELIV 2019
16th October 2019
Germany Bonn World Conference Center