Fault protected CAN transceiver with flexible data-rate

20th June 2018
Posted By : Enaie Azambuja
Fault protected CAN transceiver with flexible data-rate

Texas Instruments' CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2Mbps. Devices with part numbers that include the 'G' suffix are designed for data rates up to 5Mbps, and versions with the 'V' have a secondary power supply input for I/O level shifting the input pin thresholds and RXD output level.

This family has a low power standby mode with remote wake request feature. Additionally, all devices include many protection features to enhance device and network robustness.

Features

  • AEC Q100: Qualified for Automotive Applications
  • Device Temperature Grade 1: -40°C to 125°C Ambient Operating Temperature
  • Device HBM Classification Level: ±16kV
  • Device CDM Classification Level ±1500V
  • Meets the ISO 11898-2:2016 and
  • ISO 11898-5:2007 Physical Layer Standards
  • ’Turbo’ CAN:
  • All Devices Support Classic CAN and 2Mbps CAN FD (Flexible Data Rate) and 'G' Options Support 5Mbps
  • Short and Symmetrical Propagation Delay Times and Fast Loop Times for Enhanced Timing Margin
  • Higher Data Rates in Loaded CAN Networks
  • I/O Voltage Range Supports 3.3V and 5V MCUs
  • Suitable Passive Behavior When Unpowered
  • Bus and Logic Terminals are High Impedance (no load)
  • Power Up/Down With Glitch Free Operation On Bus and RXD Output
  • Protection Features
  • IEC ESD Protection up to ±15kV
  • Bus Fault Protection: ±58V (non-H variants) and ±70V (H variants)
  • Undervoltage Protection on VCC and VIO (V variants only) Supply Terminals
  • Driver Dominant Time Out (TXD DTO) - Data rates down to 10kbps
  • Thermal Shutdown Protection (TSD)
  • Receiver Common Mode Input Voltage: ±30V
  • Typical Loop Delay: 110ns
  • Junction Temperatures from –55°C to 150°C
  • Available in SOIC(8) Package and Leadless VSON(8) Package (3.0mm x 3.0mm) with Improved Automated Optical Inspection (AOI) Capability

Discover more here.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Agile for Automotive 2019
15th May 2019
United States of America Detroit, MI