1.6A dual brushed DC motor driver with inrush protection

5th June 2018
Posted By : Enaie Azambuja
1.6A dual brushed DC motor driver with inrush protection

TI's DRV8802-Q1 device provides an integrated motor driver solution for automotive applications. The device has two H-bridge drivers, and is intended to drive DC motors. The output driver block for each consists of N-channel power MOSFET’s configured as H-bridges to drive the motor windings. The DRV8802-Q1 device can supply up to 1.6A peak or 1.1A RMS output current (with proper heatsinking at 24V and 25°C) per H-bridge.

A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable to allow braking or coasting of the motor when disabled. Internal shutdown functions are provided for over current protection, short circuit protection, under voltage lockout and overtemperature.

The DRV8802-Q1 device is available in a 28-pin HTSSOP package with PowerPAD (Eco-friendly: RoHS & no Sb/Br).


  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results
  • Device Temperature Grade 1: –40°C to 125°C
  • Ambient Operating Temperature
  • Device HBM ESD Classification Level 2
  • Device CDM ESD Classification Level C4B
  • Dual H-Bridge Current-Control Motor Driver
  • Drives Two DC Motors
  • Brake Mode
  • Two-Bit Winding Current Control Allows Up to
  • 4 Current Levels
  • Low MOSFET On-Resistance
  • 1.6-A Maximum Drive Current at 24 V, 25°C
  • Built-in 3.3V Reference Output
  • Industry Standard Parallel Digital Control
  • Interface
  • 8V to 45V Operating Supply Voltage Range
  • Thermally Enhanced Surface Mount Package

Download the datasheet here.

You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SPS IPC Drives 2019
26th November 2019
Germany Nuremberg Messe
Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi