Optoelectronics

Linear current regulators drive automotive LED arrays

23rd August 2016
Nat Bowers
0

Designed to drive automotive LED arrays, two series of adjustable linear current regulators hve been announced by Allegro MicroSystems Europe. The AEC-Q100 qualified A6274 and A6284 low-EMI ICs integrate an optional pre-regulator gate drive to dynamically and linearly control an external P-channel MOSFET, which extends the output power capability of a linear LED driver by moving most of the power losses to an external power FET.

This eliminates the need for a DC/DC switching solution and its associated inductor, diode and higher EMI. The ICs sink up to 60mA (A6274) or 120mA (A6284) from each of six LED pins, and may also be parallelled to drive higher current LED strings for a total of up to 720mA. In addition the multiple ICs can be configured in parallel for large lighting systems.

LED light output can be adjusted by PWM dimming and the ICs include an internal PWM dimming circuit that is programmed by external resistors for accurately controlled PWM duty cycle and frequency. This eliminates the requirement for a PWM signal usually provided by a local MCU or 555 timer. Alternatively, an external PWM signal can be applied in particular if already available by an existing control module. The devices can be configured to change between full and dim modes for bi-level operation, as often needed for stop/tail Rear Combination Lamps (RCL) or Daytime Running Lights (DRL).

Both “latching” and “unlatched” versions are offered, to align fault detection and protection schemes with global standards for automotive external lighting applications.

Both devices are supplied in a 20-lead, eTSSOP package (suffix “LP”) with exposed pad for enhanced thermal performance.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier