Lighting

Displaying 81 - 90 of 90

Efficient high-voltage LED controller family

With the E522.3x chips, ELMOS introduces a new LED controller family. The ICs are designed for input voltages between 5V and 55V and an output voltage of up to 60V in boost mode, and they can be operated – depending on the type – in single and/or dual LED chain mode.
17th November 2011

See And Be Seen With Ford Headlamp Technology For A Safer Night-Time Driving

When the clocks go back this weekend, many commutes and school runs will be plunged into darkness, resulting in reduced visibility and increased risk of accidents.
31st October 2011

New Automotive Led Driver From Supertex Reduces Board Space While Improving System Reliability

New Automotive Led Driver From Supertex Reduces Board Space While Improving System Reliability
Supertex, Inc today introduced AT9919, an LED lamp driver integrated circuit, designed specifically for solid-state lighting applications in automobiles, such as head lights, tail lights, brake indicator lights, dome lights, and panel backlights. AT9919 is AEC-Q100 compliant, and drives LEDs using a buck topology. It is available in a compact, eight-lead, DFN package.
2nd September 2011


BMW develops laser light for the car

Following the introduction of the full LED headlight, laser light is the next logical step in the development of vehicle headlight technology. BMW is planning this step, thus further expanding its lead in innovative light technology.
1st September 2011

Automotive Qualified High Brightness LED Driver IC Reduces Complexity And Cost In Automotive Lighting Apps

Automotive Qualified High Brightness LED Driver IC Reduces Complexity And Cost In Automotive Lighting Apps
Micrel Inc rolled out the MAQ3203, an AEC-Q100 version of the MIC3203. This new step-down High Brightness LED (HBLED) driver IC reduces the complexity and cost of high current LED driver solutions in automotive lighting applications.
4th August 2011

Gentex Shipping Its SmartBeam(R) Feature for Audi A7

Gentex Corporation announced that its SmartBeam high-beam assist system is now available on the new 2011 Audi A7. The A7, a five-door coupe, is sold worldwide. SmartBeam (called Fernlichtassistent in German) is available in the European markets.
19th July 2011

Renesas Electronics Introduces Three New Intelligent Power Devices for Automotive Lighting Applications

Renesas Electronics Introduces Three New Intelligent Power Devices for Automotive Lighting Applications
Renesas Electronics America Inc today announced three new intelligent power devices (IPDs), the µPD166011, µPD166013 and µPD166014, for use in automotive lighting systems for turn signals and brake light applications. The new IPDs integrate into a single package, power metal-oxide-semiconductor field-effect transistors (Power MOSFETs) as switching elements and control circuits for protection and self-diagnostic functions.
1st June 2011

Innovative automotive illumination solutions use LED-based edge lighting technology

LED-based edge-lit illumination from Global Lighting Technologies (GLT) offers an array of innovative and highly efficient solutions for automotive lighting from backlit dashboard displays to interior and exterior lighting.
25th May 2011

Philips Lumileds SnapLED Takes Automotive Lighting to the Next Level with ‘Build Out of the Box’ capability

SnapLED, the automotive industry’s most widely used LED for signaling applications, has been significantly improved by Philips Lumileds. With a continued focus on reliability and performance, engineers have raised junction temperature maximums, narrowed color binning to levels imperceptible by the human eye, dual-binned for drive current to simplify the design process and make it easier to meet critical regulation requirements, and implemented a new Multi-Environment Over Stress Test (MEOST) regimen to ensure SnapLED is the most reliable automotive LED.
17th May 2011

Intersil Introduces Industry's First High Temperature Digital Ambient Light Sensor for In-Vehicle Lighting Applications

Intersil Corporation today introduced the industry's first automotive grade ambient light sensor designed to support continuous operation up to 105 degrees Celsius. The ISL76683 is qualified to the Automotive Electronics Council's AEC-Q100 grade 2, assuring reliability under significant thermal stress. It also maintains package transparency under automotive thermal stress, solving a known issue with existing sensors.
5th April 2011


Lighting documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

CES 2019
8th January 2019
United States of America Las Vegas, Nevada
Southern Manufacturing & Electronics 2019
5th February 2019
United Kingdom Farnborough
embedded world 2019
26th February 2019
Germany Nuremberg
Wearable Tech Show 2019
12th March 2019
United Kingdom London
AMPER 2019
19th March 2019
Czech Republic Brno Exhibition Centre