The future of EVs on show in Silicon Valley

21st November 2018
Posted By : Joe Bush
The future of EVs on show in Silicon Valley

Many new electric vehicles were on display at the IDTechEx Show on 14th-15th November in Santa Clara, California. However, that was the tip of the iceberg. The event had a hidden message - the future enabling technologies for electric vehicles (EVs), from buses to cars to mining vehicles.

With its origins in being the world’s largest printed electronics event, it has seamlessly extended to similar technology in sensors, 3D printed electronics and one of this year’s buzzy topics – In-Mold Electronics (IME) - based on screen printing of stretchable conducting patterns for actuators, lighting, sensing and more connected to embedded LED and IC chips. All this is vital to the future of e-aircraft and e-boats. 

Raghu Das, CEO of analyst firm IDTechEx that stages the yearly event said: “As we continue to rapidly grow the event we shall make it more obvious that your customer and your customers’ customers are present. In 2019, we shall have an electric vehicle area in the exhibition. It will major on the new enabling electric vehicle technologies that our current exhibitors have in spades, in addition to adding many more.”

IDTechEx has over 20 new reports on EVs and their technologies and it is currently carrying out consultancy for EV leaders, as well as providing detailed global information through its EV subscription platform. Exhibitors such as ABeetle Taiwan, DuPont USA and TactoTek Finland demonstrated the virtuosity of replacing 50-100 optical, sensing and actuating components with one in-mould smart material for an overhead control and lighting cluster or dashboard for example. Vital to electric vehicles, this increases reliability and life tenfold, reduces weight and volume up to 90% and makes things work better. An antenna in the surface of a moulding performs best, for example. IME is a no-brainer. In prospect is lower up front cost and cost of ownership and vitally, ‘fit-and-forget’.

ABeetle even demonstrated In-mould Electronics going into the mobility vehicles for the disabled, e-scooters and e-bikes made in Taiwan in large numbers. For TactoTek success is imminent in premium electric cars in Europe. Little wonder that top executives from GM, Volvo, Ford and their Tier One suppliers such as Denso and GE were eagerly striding the floor. IDTechEx recorded deep video interviews with Workhorse, which makes electric drones and trucks, with Ford and with speaker BYD China in electric forklifts, cars, buses and trucks and with others.

Such structural electronics extends beyond load bearing components and trim that is not dumb any more, to solar and energy storage bodywork, sometimes using conformal film. Exhibitor Alta Devices showed the best performing conformal photovoltaics that will appear all over its parent Hanergy’s electric cars in 2020. Hanergy China has a roadmap to produce 1kW/kg affordably on Energy Independent Electric Vehicles (EIEV) that never plug in. Party trick? Not at all. In that very month Hyundai and Kia announced they were getting into solar bodywork following Tesla and Toyota expressing intentions and Bollore and Audi licensing the Hanergy process for cars.

Complete emerging value chains
There was detail too. Silent Sensors exhibited piezoelectric tyre pressure monitoring that powers itself from vibration. Among the four exhibitors of printed and other piezoelectrics, Holst Centre in the Netherlands showed self-powered wide area pressure sensors. In energy storage, Zap-Go revealed its laminar supercapacitors to go in bodywork.

Delegates could follow the complete chain from carbon nanotube and graphene exhibitors to their inks and the breakthroughs imminent from using them in supercapacitors, sensors and more to create the electric vehicle of the future. Those were among themes of the eight parallel conferences, the exhibition presentations and the masterclasses.

The only in-depth coverage
The day before and the day after the event, IDTechEx staged 25 optional masterclasses and the ones on all forms of EV, electric vehicle materials, smart materials for structural electronics, and for the various emerging forms of vehicle and other battery technologies, were particularly well attended as were those on the applications of the reinvented components - including haptics, actuators, IOT, RFID and textile electronics - in electric vehicles and elsewhere.

In the audiences were big users such as FedEx learning latest advances from Deutsche Post DHL and how the solar and other structural electronics in Boeing, Airbus and Chinese giant drones will keep them aloft for years. Exhibitor PPG Industries had flexible ferrites needed for charging cars at speed on the solar roads discussed. The huge number of coating companies and others present revealed new support for the trillion dollar electric vehicle market coming soon.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

CES 2019
8th January 2019
United States of America Las Vegas, Nevada
Southern Manufacturing & Electronics 2019
5th February 2019
United Kingdom Farnborough
embedded world 2019
26th February 2019
Germany Nuremberg
Wearable Tech Show 2019
12th March 2019
United Kingdom London
AMPER 2019
19th March 2019
Czech Republic Brno Exhibition Centre