Design

Displaying 11 - 20 of 592

System basis chip with integrated CAN FD controller and transceiver

System basis chip with integrated CAN FD controller and transceiver
Texas Instruments has introduced an automotive system basis chip that is, according to the company, the industry’s first to integrate a controller and transceiver for Controller Area Network with Flexible Data Rate (CAN FD). Designed to meet the high bandwidth and data rate flexibility needs of in-vehicle networks, the TCAN4550-Q1 uses the SPI bus of almost any microcontroller to implement, with minimal hardware changes, a CAN FD interface or increase the amount of CAN FD bus ports in a system.
13th June 2019

Single-port USB Smart Hub ICs optimise system costs

Single-port USB Smart Hub ICs optimise system costs
The introduction of new single-port USB Smart Hub ICs have been announced by Microchip, to extend its family of USB automotive products, to give automotive manufacturers the ability to provide dependable and convenient connectivity while optimising system costs. 
12th June 2019

Duo team up to work on vehicle-to-cloud solutions for connected cars

Duo team up to work on vehicle-to-cloud solutions for connected cars
Wind River and Airbiquity are working towards integrating key technologies to develop an end-to-end software life cycle management solution for connected and autonomous vehicles, one that spans vehicle to cloud. The solution will enable secure OTA software updates and data management. Proper and proactive management of software over the course of a vehicle’s life cycle is becoming increasingly important to enhance performance, maintain value, and address safety and security threats.
5th June 2019


Software designed to utilise hardware accelerators in R-Car V3H

Software designed to utilise hardware accelerators in R-Car V3H
Renesas Electronics continues to accelerate the development of Advanced Driver Assistance Systems (ADAS) systems with a new Perception Quick Start Software based on its R-Car V3H System-on-Chip (SoC). The solution delivers reference software for Camera Obstacle Detection (COD), LiDAR Obstacle Detection (LOD), and Road Feature Detection (RFD) - three key recognition areas for sensor-based Level 2+ autonomous vehicle systems.
3rd June 2019

Automotive cockpit reference solution based on R-Car SoC

Automotive cockpit reference solution based on R-Car SoC
Renesas Electronics has introduced the Renesas Cockpit Reference Solution, providing an out-of-the-box development experience for quick and cost effective digital cockpit application design. Developed based on Renesas R-Car M3 System-on-Chip (SoC), the Renesas Cockpit Reference Solution delivers a combination of production focused, module-level hardware and software developed by Renesas with additional software from Renesas’ automotive partner network to ease the burden of system-level design.
30th May 2019

Platform meets the demands of current automotive trends

Platform meets the demands of current automotive trends
Vector simplifies the introduction of AUTOSAR Adaptive: The model-based E/E development environment PREEvision comprehensively supports users in expanding existing software and hardware architectures with the capabilities of the AUTOSAR Adaptive Platform. AUTOSAR Adaptive expands the AUTOSAR platform to meet the demands of current automotive trends like autonomous driving, electrification and connectivity.
28th May 2019

Automotive head unit integrated circuits solutions

Automotive head unit integrated circuits solutions
Head units with remote displays typically have the infotainment features divided into multiple systems. This makes the head unit more configurable by the OEM allowing for features to be added or removed for different vehicle models. Texas Instruments offers solutions that allow remote inter-connectivity of these while addressing reduced system EMI.
20th May 2019

Motor control solution for multiple automotive HVAC flap actuators

Motor control solution for multiple automotive HVAC flap actuators
The TIDA-01357 reference design from Texas Instruments offers a DC motor control solution for multiple automotive HVAC flap actuators or dampers. This design demonstrates a cost-effective motor driver solution for six flap actuators/dampers where all six motors can be driven simultaneously with an output current up to 0.4A per motor. 
17th May 2019

Validation programme to accelerate autonomous vehicle development

Validation programme to accelerate autonomous vehicle development
Siemens has introduced the PAVE360 pre-silicon autonomous validation environment - a programme established to enable and accelerate the development of innovative autonomous vehicle platforms. PAVE360 provides a comprehensive environment for multi-supplier collaboration across the automotive ecosystem for the development of next-gen automotive chips.
16th May 2019

Automotive blockchain technology provides supply chain visibility

Automotive blockchain technology provides supply chain visibility
Vinturas, a consortium of automotive logistics service providers in Europe, has announced that it will operate a digital, blockchain based platform, to provide end-to-end visibility in the supply chain of finished vehicles. Today’s automotive logistics infrastructure is characterised by scattered information flows and multiple legacy systems, making it impossible to trace vehicles on their way to the dealer.
15th May 2019


Design documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

ELIV 2019
16th October 2019
Germany Bonn World Conference Center