Construction & Test

Displaying 221 - 230 of 252

7Layers Korea- Now Performing MirrorLink Certification Testing

The 7Layers test & engineering center in Korea has received Car Connectivity Consortium (CCC) authorized status. 7Layers can now perform MirrorLink certification testing, thus helping to ensure interoperability between in-vehicle infotainment systems and drivers’ smartphones.
12th December 2011

New option for Rohde & Schwarz oscilloscopes allows fast, reliable FlexRay interface testing

New option for Rohde & Schwarz oscilloscopes allows fast, reliable FlexRay interface testing
Manufacturers in the automotive industry's premium segment frequently rely on FlexRay as a communications interface. They can now benefit from the high acquisition rate and accuracy of the R&S RTO oscilloscopes from Rohde & Schwarz: A new option offers all the features needed for fast and reliable FlexRay debugging.
6th December 2011

Complete Test Laboratory Solutions for On-site Operation at Carmakers and Suppliers

RUETZ SYSTEM SOLUTIONS - as of now offers 'Test Laboratory as a Service'. With it the test house provides fully equipped test laboratory solutions for the customer that cover bus technologies like CAN, USB, and Ethernet, as well as MOST in all three bandwidths: 25, 50 and 150 Mbit/s. The Ruetz System Solutions Test Development Kit (TDK) offers all options for effective test design, automation and maintenance.
21st November 2011


Test of ECUs with LIN 2.0 Interface

The LIN bus was standardized in the late 1990s, and has been in widespread use in the automotive industry since. The reason for its introduction was the necessity to increase the communication capability that pushed the envelope of CAN networks because of high numbers of ECUs and data volume in vehicles. From an economic point of view the challenge was to develop a cheaper alternative to the relatively complex CAN interface. A LIN network always connects a limited number of ECUs that build a closed functional unit. The coupling of single LIN subsystems to the vehicle’s central CAN network is done by a control unit with gateway function. The communication on the LIN bus is monitored by a Master bus device. The remaining ECUs work in Slave Mode.
5th October 2011

Ford Engineers Get Out Of This World Visions Of Ford Products In Their Quest For Quality

The surface of an alien planet or a drop of oil? A piece of abstract art or a close-up of a metal surface? As Dunton-based engineers develop new parts, thesehugely magnified images, produced by Ford’s Scanning Electron Microscope, can uncover the tiniest defects invisible to the naked human eye.
5th October 2011

Efficient Technology For Workshops

Efficient Technology For Workshops
Efficient Technology for Workshops, Bosch Offers Future-Oriented Testing Systems for the Maintenance and Repair of Modern Vehicles
13th September 2011

Evolutionary Testing Research at Berner & Mattner

In a joint effort, the consultant and software developer Berner & Mattner and the Centre for Research on Evolution, Search and Testing (CREST) of the University College London (UCL) are developing methods for the evolutionary generation of test scenarios for the automotive industry.
12th August 2011

Berner & Mattner Presents MODENA Version 5.1.0 Easier specification and testing of infotainment ECUs

Berner & Mattner Presents MODENA Version 5.1.0 Easier specification and testing of infotainment ECUs
Berner & Mattner presents MODENA 5.1.0 as an extended version of its proven specification and test software for model-based development in the area of automotive infotainment, thus increasing the application range for users. In the MOST area, the new version of MODENA supports selected stress features and the MOST High Protocol in accordance with the MOST High Protocol specification 2.3. In addition, MODENA now includes a separate event for processing CAN error frames.
12th August 2011

PRQA Introduces a New Approach to Defect and Security Vulnerability Detection

Programming Research a global leader of static analysis tools and TÜV SÜD Automotive, a global leader in technical certification services, announce that QA·C and QA·C++ source code analyzer tools are undergoing certification by TÜV SÜD as fit for purpose for use in the development of safety related systems according to IEC 61508 Edition 2.0 and the ratified version of ISO 26262.
7th July 2011

SoundChecker – New cost-efficient Acoustic Analysis System

GOEPEL electronic introduces SoundChecker, a new, cost-efficient complete system for acoustic and impact sound analyses.
16th June 2011


Construction & Test documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SENSOR+TEST 2018
26th June 2018
Germany Nürnberg Exhibition Centre
European Microwave Week 2018
23rd September 2018
Spain Ifema Feria De Madrid
Engineering Design Show 2018
17th October 2018
United Kingdom Ricoh Arena, Coventry
electronica 2018
13th November 2018
Germany Messe Munchen
SPS IPC Drives 2018
27th November 2018
Germany Nuremberg