Construction & Test

Displaying 11 - 20 of 289

Software tool speeds development of AUTOSAR-4 projects

Software tool speeds development of AUTOSAR-4 projects
vVIRTUALtarget is a tool for virtual testing of AUTOSAR ECUs from Vector. It enables faster software development implementations in typical AUTOSAR-4 projects. The virtualised environment makes it possible to test the ECU software throughout the development process. Users benefit from rapid test execution that can be even faster than in real time.
22nd November 2018

Radar technology puts complex demands on automotive supply chain

Radar technology puts complex demands on automotive supply chain
Vehicle construction is an innovation driver in Germany, and according to the report INNOVATIONEN IN DER DEUTSCHEN WIRTSCHAFT (Innovations in the German economy) of the Fraunhofer Institute and the Center for European Economic Research, €52.4 billion was invested in 2016 alone – with an upward trend. The focus is on autonomous driving, and new developments in this area mean continuous process changes, not just for automobile manufacturers. The entire automotive supply chain must adapt to new challenges.
5th November 2018

Semiconductor temperature testing for automotive applications

Semiconductor temperature testing for automotive applications
Complete ASIC manufacturing and supply chain solution provider, DELTA Microelectronics, has announced the expansion of its semiconductor test services to include extremely high and low operating temperature testing. Automotive and industrial applications typically require stringent testing to ensure semiconductor and IC thermal behaviour and reliability at wider operating temperature ranges. 
1st November 2018


Media converter targets automotive Ethernet

Media converter targets automotive Ethernet
Automotive Ethernet is a standardised interface in the automotive industry and an important component of future vehicle architectures. GOEPEL electronic has now developed the second generation of the EasyCON media converter. It physically converts a standard Ethernet layer to Automotive Ethernet 1000/100 Base-T1.
30th October 2018

LTE-V interoperability tests make connected vehicles a reality

LTE-V interoperability tests make connected vehicles a reality
Rohde & Schwarz and Huawei have successfully tested the interoperability of LTE-V connected vehicles with the R&S CMW500 wideband radio communication tester using the embedded Huawei Balong 765 IC as an LTE-V UE. The solution verified multiple test scenarios for internet of vehicles (IoV) communications based on 3GPP Release 14 Mode 4.
26th October 2018

Automotive manufacturing process increases flexible production

Automotive manufacturing process increases flexible production
The automotive design process has evolved over the past few decades mainly through the introduction of digitalisation. These advancements have enabled businesses to adapt their manufacturing techniques to meet the demands of the industry, saving them time and streamlining the path to the latter stages of production and design. However, Accurate Technologies Inc (ATI) has identified a further opportunity within the automotive Measurement, Calibration and Diagnostics (MCD) sector.
23rd October 2018

Tester visualises and characterises signal penetration of radomes

Tester visualises and characterises signal penetration of radomes
Automotive radars are often located behind bumpers and brand emblems. The materials of these covers (radomes) should allow the radar signals to pass through as uniformly and unhindered as possible. With the imaging R&S QAR automotive radome tester from Rohde & Schwarz, users in development and production environments can now check this easily, reliably and under automated control.
10th October 2018

Duo collaborate on TC8 Automotive Ethernet testing

Duo collaborate on TC8 Automotive Ethernet testing
Rohde & Schwarz and Spirent have announced a partnership to provide a fully integrated test solution, offering full coverage of both the physical and protocol layers for automotive Ethernet TC8 ECU test specifications. As members of the OPEN Alliance (One-Pair Ether-Net) Special Interest Group (SIG), both companies have been working closely with the industry and have joined forces to develop tailored solutions to address the challenges that the emerging technologies bring.
7th October 2018

Radar test solution advances autonomous driving safety

Radar test solution advances autonomous driving safety
The E8740A Automotive Radar Signal Analysis and Generation Solution from Keysight Technologies has been enhanced to enable radar-based, advanced driver assistance systems to proactively detect and mitigate risks of collisions. As advanced driver-assistance systems (ADAS) and autonomous vehicles gain in popularity, they also raise concerns about safety and reliability.
26th September 2018

Power analyser boasts ± 0.03% measurement accuracy

Power analyser boasts ± 0.03% measurement accuracy
The Yokogawa WT5000 is the first of a new generation of Precision Power Analysers that offers exceptional measurement accuracy of ± 0.03% combined with stability, noise immunity and plug-in modular flexibility to meet the measurement needs of today’s developers of energy-efficient systems.
21st September 2018


Construction & Test documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

ADAS Sensors 2019
20th March 2019
United States of America Detroit, Michigan
Agile for Automotive 2019
15th May 2019
United States of America Detroit, MI