Toshiba Electronics Europe

Address:
Hansaallee 181, D-40549 Düsseldorf, Germany
40549
Germany

Phone: +49 (0) 211 5296 0

Fax: +49 (0) 211 5296 79254

Web: http://www.toshiba-components.com/pressoffice/index.asp


Toshiba Electronics Europe articles

Displaying 1 - 20 of 73

4-channel linear power amplifier for car audio

4-channel linear power amplifier for car audio
A new 4-channel high efficiency linear power amplifier for in-vehicle audio applications has been introduced by Toshiba Electronics Europe in order to meet the performance and sound quality demands of electronic engineers. 
7th November 2018

Highly expandable Bluetooth 5 IC for automotive applications

Highly expandable Bluetooth 5 IC for automotive applications
  It has been announced by Toshiba Electronics Europe (Toshiba), that a new Bluetooth IC for automotive applications will be added to their IC line-up. The TC35681IFTG is based on an arm Cortex-M0 CPU and is compliant with Bluetooth Low Energy (LE) core specification 5.0.
31st October 2018

Power amplifier designed for automotive audio systems

Power amplifier designed for automotive audio systems
  A new 4-channel power amplifier from Toshiba Electronics has been launched. It is designed for automotive audio applications that is highly resistant to the power surges typically found within vehicle electronics.
26th September 2018


Analogue output IC photocoupler for automotive applications

Analogue output IC photocoupler for automotive applications
Toshiba Electronics Europe has announced the launch of a new analogue output IC photocoupler that enables high-speed communications in automotive applications – especially electric vehicles (EV) and hybrid electric vehicles (HEV). The TLX9309 consists of a high-output GaAlAs light emitting diode (LED) that is optically coupled to a high-speed detector. The detector consists of a photodiode and a transistor integrated onto a single chip.
5th July 2018

Interface bridge devices for automotive infotainment applications

Interface bridge devices for automotive infotainment applications
Toshiba Electronics Europe has announced a range of video interface bridge devices intended for modern automotive In-Vehicle Infotainment (IVI) applications. Increasingly, SoCs from smartphones and tablets have been used in automotive applications as IVI systems became more sophisticated, requiring more functionality and greater performance. However, due to differing connectivity standards on devices such as displays, existing SoCs often lack of necessary interfaces required for automotive networks.
6th June 2018

Automotive power MOSFETs housed in low resistance package

Automotive power MOSFETs housed in low resistance package
Toshiba Electronics has released two new MOSFETs housed in the small low resistance SOP Advance (WF) package in 5x6mm size, as new additions to the automotive 40V N-channel power MOSFET series. The TPHR7904PB and TPH1R104PB are AEC-Q101 qualified and are intended for a variety of automotive applications including Electric Power Steering (EPS), load switches, electric pumps, fans and more.
2nd May 2018

Automotive power amplifier IC can operate when engine is idle

Automotive power amplifier IC can operate when engine is idle
A new high sound quality, low distortion, surface mount product has been added to Toshiba Electronics Europe's line-up of 4-channel power ICs for automotive applications. The new TCB001FNG is based upon a pure complementary MOS process that is derived from Toshiba’s car audio IC research and development and reduces cost. The new product includes functions to detect and prevent abnormal noise with Toshiba’s original filtering technology.
15th February 2018

UFS 2.1-compliant flash memory for automotive applications

UFS 2.1-compliant flash memory for automotive applications
Sample shipments of Toshiba Memory Europe's embedded NAND flash memory products for automotive applications that are compliant with JEDEC UFS version 2.1 have begun. The new products meet AEC-Q100 Grade 2 requirements, support the wide temperature range of -40 to 105°C, and offer the enhanced reliability capabilities that are required by increasingly complex automotive applications.
14th December 2017

Bluetooth low energy IC suitable for automotive applications

Bluetooth low energy IC suitable for automotive applications
A new IC has been announced by Toshiba Electronics Europe that is compliant with Bluetooth Low Energy (LE) core specification 4.2 including support for secure connection, LE privacy features and extended packet length support. It is available for use in harsh automotive environments and extended temperature ranges. The mixed-signal TC35679IFTG contains both analogue RF and baseband digital parts to provide a complete solution in a single, compact and low-profile, 40-pin 6x6x1mm QFN ‘wettable flank’ package, with a pin pitch of 0.5mm.
6th December 2017

Stepping motor driver suitable for automotive applications

Stepping motor driver suitable for automotive applications
  A new constant current 2-phase stepping motor driver has been launched by Toshiba Electronics Europe for automotive applications and a range of general uses, including adjusting the mirror for projection of heads-up displays, motorcycle valves and valve/damper controllers in HVAC applications.
23rd November 2017

Photocoupler enables high speed automotive communication

Photocoupler enables high speed automotive communication
  Housed in a 5-pin 3.7x7.0x2.2mm SO6 package, Toshiba Electronics Europe has unveiled the TLX9310, a low power consumption photocoupler. The new device is intended for high-speed communication in automotive applications, especially Battery Management Systems (BMS).
11th October 2017

Image recognition processor powers active safety system

Image recognition processor powers active safety system
  Toshiba Electronic Devices & Storage has announced that DENSO is deploying Visconti4, its latest image-recognition processor dedicated to automotive applications, in next-gen, front-camera-based active safety systems. Visconti4 is a multi-engine road-safety solution that provides drivers with real time analytics of road conditions and potential dangers.
2nd August 2017

Optocouplers address isolation & interface requirements

Optocouplers address isolation & interface requirements
Toshiba has introduced a range of 10 AEC Q101-qualified photocouplers designed to address the demanding isolation, interface, switching and form factor requirements of automotive applications. Supplied in low-profile SO6 packages, the TLX9304, TLX9378 and TLX9376 are IC output photocouplers offering respective data rates of 1Mbps, 10Mbps and 20Mbps. Also in S06 packaging are the TLX9300 and TLX9185A transistor output and TLX9905 and TLX9906 photovoltaic output devices.
9th June 2017

Power management IC for car audio systems

Power management IC for car audio systems
A new system regulator IC has been launched by Toshiba Electronics Europe (TEE) that is designed to handle the increasing sophistication of car audio systems. The TCB010FNG is a fully-featured solution, incorporating the required power supply and all essential detection functions. TCB010FNG incorporates a multi-rail microcontroller power supply that retains power during minor interruptions in the battery supply. The device also includes multiple variable power supplies for flexibility, as well as a fixed power supply.
8th June 2017

Embedded NAND flash memory products for automotive applications

Embedded NAND flash memory products for automotive applications
The launch of Toshiba Corporation’s Storage & Electronic Devices Solutions's JEDEC e∙MMCTM Version 5.1 compliant embedded NAND flash memory products supporting AEC-Q100 Grade2 requirements has been announced. The line-up offers densities of 8, 16, 32 and 64GB. Sample shipments have already started with mass production scheduled for the second quarter (April-June) of 2017.
21st December 2016

MOSFET has low-loss synchronous switching in parallel operation

MOSFET has low-loss synchronous switching in parallel operation
A 100V, 160A power MOSFET range has been launched by Toshiba Electronics Europe that delivers a tighter threshold voltage (Vth) specification than previous devices. A tighter threshold voltage specification is very important in switching applications and the TK160F10N1L offers min/max Vth of 2.5/3.5V versus its predecessor’s 2/4V range.
3rd November 2016

Automotive power MOSFETs expand with low resistance device

Automotive power MOSFETs expand with low resistance device
The family of automotive power MOSFETs from Toshiba Electronics Europe has expanded with the TK1R5R04PB - the first device in its low-resistance D2PAK+ package. While the D2PAK+ has the same footprint as a conventional D2PAK (or TO-263) package, it offers reduced package resistance. This is thanks to a source pin that is much wider near to the mould surface than that of a conventional D2PAK.
20th October 2016

Devices provide low ON-resistance for load switch applications

Devices provide low ON-resistance for load switch applications
Two compact, N-Channel MOSFETs for load switching in automotive applications have been announced by Toshiba. The 60V SSM3K341R and the 100V SSM3K361R deliver class leading low ON-resistance and are qualified according to the AEC-Q101 standard. As a result, they are suitable for use in power management, including DC/DC converter or load switch applications which are of increasing importance for the ever developing electronic systems in vehicles.
12th September 2016

Video processor offers full HD display on two panels

Video processor offers full HD display on two panels
Expanding its line-up of video processors for high-resolution automotive displays, Toshiba Electronics Europe has announced the TC90175XBG. This video processor is suited for the larger, higher resolution driver support information displays that are increasingly used in vehicles for applications other than navigation.
31st August 2016

Power amplifier IC enables better car audio quality

Power amplifier IC enables better car audio quality
  Designed for automotive audio applications, Toshiba Electronics Europe has introduced a 49W-per-channel power amplifier IC. The four-channel TCB501HQ provides high output power and low distortion and detects output offset voltage.
19th July 2016


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

CES 2019
8th January 2019
United States of America Las Vegas, Nevada
Southern Manufacturing & Electronics 2019
5th February 2019
United Kingdom Farnborough
embedded world 2019
26th February 2019
Germany Nuremberg
Wearable Tech Show 2019
12th March 2019
United Kingdom London
AMPER 2019
19th March 2019
Czech Republic Brno Exhibition Centre