Rohde & Schwarz GmbH & Co. KG

Address:
Mühldorfstraße 15
München
D-81671
Germany

Phone: +49 89 418695-0

Fax: +49 89 404764

Web: http://www.rohde-schwarz.com

Rohde & Schwarz is one of the world's largest manufacturers of electronic test and measurement equipment. Our products set standards in research, development, production and service. As a key partner of industry and network operators, we offer a broad spectrum of market-leading solutions for the newest wireless technologies as well as for RF and microwave applications up to 500 GHz.


Rohde & Schwarz GmbH & Co. KG articles

Displaying 1 - 20 of 34

Stuttgart hosts automotive test solutions

Stuttgart hosts automotive test solutions
A wide range of testing solutions that support advanced automotive applications will be showcased by Rohde & Schwarz at Automotive Testing Expo Europe 2019 in Stuttgart (May 21-23). The solutions on display cover the testing of automotive radar sensors, automotive Ethernet, 5G and cellular V2X as well as audio/video quality.
19th May 2019

Oscilloscopes for debugging automotive Ethernet networks

Oscilloscopes for debugging automotive Ethernet networks
Developers of electronic control units (ECUs) with an automotive Ethernet interface must perform tests to ensure that their devices work properly. However, if problems occur during signal transmission, plain Ethernet protocol analysis is not adequate in most cases. The new trigger and decode bundle for oscilloscopes from Rohde & Schwarz provides a good workaround for this problem.
29th March 2019

RF power meter accelerates complex test setups

RF power meter accelerates complex test setups
High-precision RF power measurement for modern applications is a challenge. Rohde & Schwarz is launching the R&S NRX RF power meter on the market so that users can transparently configure their measurements and perform them conveniently. The instrument even makes it possible to perform triggered and synchronised multichannel measurements with different power sensors.
18th March 2019


Duo collaborate to deliver C-V2X test solution

Duo collaborate to deliver C-V2X test solution
Rohde & Schwarz is collaborating with automotive E/E networking specialist Vector on a state-of-the-art cellular vehicle-to-everything (C-V2X) application layer test solution. The companies’ integrated test platform, which will be showcased for the first time at Mobile World Congress 2019 in Barcelona (February 25-28).
18th February 2019

Automotive Ethernet test lab wins Rohde & Schwarz support

Automotive Ethernet test lab wins Rohde & Schwarz support
Test and measurement specialist Rohde & Schwarz has provided an Automotive Ethernet testing solution to the University of New Hampshire InterOperability Laboratory (UNH-IOL). From now on, OEMs, Tier 1s, Tier 2s, and System Integrators can submit their products for compliance test certification via UNH-IOL, the first OPEN Alliance accredited test lab providing test certification for Automotive Ethernet.
15th February 2019

Duo advance 5G V2X latency tests

Duo advance 5G V2X latency tests
Cellular-based 5G V2X latency measurements in vehicular environments have been successfully conducted by Rohde & Schwarz and Huawei in field tests in Munich and Shanghai. The initial measurements have shown that it is possible to achieve delays in the millisecond regime in a 5G network, demonstrating a superior latency performance in comparison to LTE.
5th December 2018

Radar technology puts complex demands on automotive supply chain

Radar technology puts complex demands on automotive supply chain
Vehicle construction is an innovation driver in Germany, and according to the report INNOVATIONEN IN DER DEUTSCHEN WIRTSCHAFT (Innovations in the German economy) of the Fraunhofer Institute and the Center for European Economic Research, €52.4 billion was invested in 2016 alone – with an upward trend. The focus is on autonomous driving, and new developments in this area mean continuous process changes, not just for automobile manufacturers. The entire automotive supply chain must adapt to new challenges.
5th November 2018

LTE-V interoperability tests make connected vehicles a reality

LTE-V interoperability tests make connected vehicles a reality
Rohde & Schwarz and Huawei have successfully tested the interoperability of LTE-V connected vehicles with the R&S CMW500 wideband radio communication tester using the embedded Huawei Balong 765 IC as an LTE-V UE. The solution verified multiple test scenarios for internet of vehicles (IoV) communications based on 3GPP Release 14 Mode 4.
26th October 2018

Tester visualises and characterises signal penetration of radomes

Tester visualises and characterises signal penetration of radomes
Automotive radars are often located behind bumpers and brand emblems. The materials of these covers (radomes) should allow the radar signals to pass through as uniformly and unhindered as possible. With the imaging R&S QAR automotive radome tester from Rohde & Schwarz, users in development and production environments can now check this easily, reliably and under automated control.
10th October 2018

Duo collaborate on TC8 Automotive Ethernet testing

Duo collaborate on TC8 Automotive Ethernet testing
Rohde & Schwarz and Spirent have announced a partnership to provide a fully integrated test solution, offering full coverage of both the physical and protocol layers for automotive Ethernet TC8 ECU test specifications. As members of the OPEN Alliance (One-Pair Ether-Net) Special Interest Group (SIG), both companies have been working closely with the industry and have joined forces to develop tailored solutions to address the challenges that the emerging technologies bring.
7th October 2018

Uni uses ScopeRider to triumph at Isle of Man TT

Uni uses ScopeRider to triumph at Isle of Man TT
Rohde & Schwarz helped the University of Nottingham develop its electric Superbike which took second place in the SES TT Zero race at the Isle of Man TT this summer. The university achieved its highest ever placing at the event, splitting the two factory Mugen bikes, an historic feat never before achieved by a university team.
5th September 2018

Rohde & Schwarz takes to the road in smart highway project

Rohde & Schwarz takes to the road in smart highway project
The future of transportation lies in automated driving and complex driver assistance systems. This requires that all vehicles be connected with their surroundings via a high-performance mobile communications infrastructure. Rohde & Schwarz T&M equipment is being used in the Providentia research project.
23rd August 2018

Echo generator tests radar sensors in 24GHz ISM band

Echo generator tests radar sensors in 24GHz ISM band
As essential components for autonomous driving, radar sensors help keep road users safe. With each stage on the way to fully autonomous driving, the number of radar sensors per vehicle rises significantly. Both OEMs and Tier 1 suppliers need reliable test solutions, suitable for mass production, for the large number of safety-related radar-based driver assistance systems.
7th August 2018

Automotive test equipment on parade in Stuttgart

Automotive test equipment on parade in Stuttgart
Under the banner "Driving tomorrow's mobility", Rohde & Schwarz will present its wide-ranging portfolio of automotive T&M equipment at Automotive Testing Expo Europe (ATE 2018) in Stuttgart (June 5-7). The focus will be on applications in the areas of radar, V2X communications, eCall and automotive Ethernet for development, qualification and production.
1st June 2018

eCall modules test met with software solution

eCall modules test met with software solution
From April 1, 2018 onward, all newly registered cars and light trucks in the European Union must be equipped with the eCall automatic emergency system. An option released by Rohde & Schwarz for the R&S SMBV100A vector signal generator together with test automation software delivers standard-compliant, fully automated performance tests for the GNSS receiver integrated in the eCall module.
12th February 2018

Meyer heads Rohde & Schwarz drive into automotive market

Meyer heads Rohde & Schwarz drive into automotive market
Jürgen Meyer has been named as Director of the automotive market segment at Rohde & Schwarz. He is responsible for developing the market segment as far as product positioning and expanding the customer base.
20th October 2017

Automotive radar test solution unveiled at EuMW

Automotive radar test solution unveiled at EuMW
  A range of solutions for automotive radar testing based on its expertise in microwave and millimeterwave testing were unveiled by Rohde & Schwarz at European Microwave Week 2017 in Nuremberg. The soon-to-be-available innovative solutions range from analysing radomes to generating multidimensional automotive radar echo environments.
11th October 2017

Variety of test solutions on parade at Stuttgart show

Variety of test solutions on parade at Stuttgart show
At the Automotive Testing Expo (ATE) 2017 (20-22 June) in Stuttgart, Rohde & Schwarz will demonstrate its expertise for the automotive industry. The company will showcase innovative test solutions for the development and production of automotive radar sensors used in driver assistance systems.
20th June 2017

R&S' T&M equipment adopted by Renesas for R&D, conformance test & production of IEEE 802.11p devices

Development of wireless, automated communications between traffic participants will continue in order to improve road safety. At present, various wireless technologies are under discussion for implementing V2X communications. IEEE 802.11p (11p) is one of the promising candidates. Rohde & Schwarz already supports the automotive industry with a wide range of T&M solutions for 11p. Renesas relies on these test solutions when developing, manufacturing and conformance testing its devices in line with IEEE 802.11p.
9th May 2017

Embedded World:1000Base-T1 test solution aids ECU development

The R&S RTO-K87 option, the first compliance test software on the market for automated testing of IEEE 1000Base-T1 interfaces was released by Rohde & Schwarz at Embedded World in Nuremberg. Fast data transmission within automotive Ethernet networks is critical for driver assistance systems as well as for autonomous driving applications.
17th March 2017


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

ELIV 2019
16th October 2019
Germany Bonn World Conference Center