Mentor Graphics Corporation

Address:
8005 SW
Boeckman Road
Wilsonville
OR 97070
United States of America

Phone: +1503-685-7000

Web: http://www.mentor.com

Mentor Graphics® is a leader in electronic design automation software.

We enable companies to develop better electronic products faster and more cost-effectively. Our innovative products and solutions help engineers conquer design challenges in the increasingly complex worlds of board and chip design.


Mentor Graphics Corporation articles

Displaying 1 - 20 of 37

Next-gen vehicle networks design simplified

Next-gen vehicle networks design simplified
Mentor has helped China Euro Vehicle Technology AB (CEVT) dramatically speed and simplify the design of its sophisticated, next-gen in-vehicle networks. Combining Mentor’s Volcano VSA COM Designer network design tool with SystemWeaver information management tools from Systemite AB, CEVT has replaced time-consuming manual tasks with a fully automated process, resulting in a 50% time reduction in the design and verification of end-solutions.
1st December 2017

Emulation platform software added to qualification programme

Mentor has announced that independent compliance firm SGS-TÜV Saar has certified the ISO 26262 compliance of tool qualification reports for key software elements of its Veloce Strato emulation platform.
27th July 2017

Mentor Graphics achieves ISO 26262 qualification

Mentor has further expanded its Mentor Safe functional safety assurance programme by qualifying the ISO 26262 compliance of documentation for its Oasys-RTL Physical RTL Synthesis, Nitro-SoC Place and Route, and FormalPro Logic Equivalency Checker products.
19th June 2017


Mentor Graphics platform enables autonomous driving through real time sensing

Mentor Graphics has introduced the DRS360 platform – a comprehensive automated driving solution featuring breakthrough technology that captures, fuses and utilises raw data in real time from a wide range of sensing modalities, including radar, LIDAR, vision and other sensors.
5th April 2017

Mentor Graphics achieves ISO 26262 certification

Mentor Graphics has announced that independent compliance firm SGS-TÜV Saar has certified the ISO 26262 compliance of Mentor’s Software Tool Qualification Report for its Questa Simulation, Verification Management and Clock-Domain Crossing (CDC) products.
23rd March 2017

Functional safety programme expanded

A broad and comprehensive ISO 26262 qualification programme has been introduced by Mentor Graphics Corporation, Mentor Safe. The programme includes the Nucleus SafetyCert real time operating system, the Volcano VSTAR AUTOSAR operating system and BSW stack, and a growing array of ISO 26262 certified documentation and qualification reports for Mentor tools supporting design and verification of System-on-Chip (SoC), system, mechanical and thermal applications. 
16th January 2017

ECU development erupted by Volcano software

ECU development erupted by Volcano software
Mentor Graphics Corporation has announced that Toyota Motor Corporation has approved its Volcano VSTAR AUTOSAR basic software stack for use in all Toyota vehicles. With this approval, global Tier 1 automotive suppliers can now leverage Mentor’s fast, resource-efficient AUTOSAR stack for the design and development of advanced Electronic Control Units (ECUs) in next-gen Toyota models.
2nd December 2016

NASCAR championship win attributed to CFD technology

NASCAR championship win attributed to CFD technology
It has been announced that Mentor Graphics Corporation's FloEFD Computational Fluid Dynamics (CFD) technology was used to improve the performance of the racecar driven by Anthony Kumpen of Belgium, who was crowned the NASCAR Whelen Euro Series Champion this month. 
29th November 2016

Companies plug in to smart electric vehicle charging

Companies plug in to smart electric vehicle charging
A joint engineering and marketing agreement has been announced by Mentor Graphics Corporation and Telemotive AG. The heart of the agreement will be the integration of Mentor’s Volcano VSTAR AUTOSAR stack with Telemotive’s Power Line Communication (PLC).
27th October 2016

Power tester solution for electric and hybrids

Power tester solution for electric and hybrids
To test electric and hybrid vehicle (EV/HEV) power electronics reliably during power cycling, Mentor Graphics Corporation has introduced its latest MicReD Power Tester 600A product. The MicReD Power Tester 600A offering allows EV/HEV development and reliability engineers to test power electronics (such as insulated gate bipolar transistors - IGBTs, MOSFETs, transistors and chargers) for mission critical thermal reliability and lifecycle performance. 
23rd May 2016

Vehicles are now being designed using Mentor Automotive Capital tools

Vehicles are now being designed using Mentor Automotive Capital tools
Mentor Graphics Corporation has announced that General Motors is deploying Mentor Capital electrical systems design tools for its vehicle development projects. The tools deliver cycle time reductions and support improved engineering processes, helping General Motors efficiently deliver the new electronic features demanded by the car-buying public.
17th February 2016

Company drives industry towards enhanced in-car audio experience

Mentor Graphics Corporation has announced the Mentor Automotive A2B Analyser, the industry’s first third-party development platform supporting the Automotive Audio Bus (A2B) technology developed by Analog Devices. As automotive design complexity continues to grow, OEMs and suppliers are challenged with integrating faster, more efficient technologies into the automotive architecture at lower system costs.
22nd December 2015

Optimising cost and weight in auto and aero sectors

Optimising cost and weight in auto and aero sectors
New tools are now available from Mentor Graphics that deliver integrated electrical/electronic/software systems engineering capability for the transportation market. The Capital Systems tools allow implementations to be optimised for key parameters such as cost and weight. Unlike other approaches, engineers within the various disciplines do not need to understand one another’s detailed syntax.
9th December 2015

Digital instrument cluster solution features 3D graphics

Digital instrument cluster solution features 3D graphics
Mentor Graphics has announced the availability of the Mentor Automotive Safety Certifiable Digital Instrument Cluster solution enabling safety-critical driver information to be displayed simultaneously with rich 3D graphics on a single instrument cluster display. The software architecture is implemented on a multi-core and even on single-core SoC and features very fast boot time.
21st October 2015

Automotive Ethernet support added to ECU design tool

Automotive Ethernet support added to ECU design tool
The use of Ethernet, particularly in areas where high bandwidth and reliable performance are essential, is increasing. Mentor Graphics has announced the availability of automotive Ethernet support in its Volcano VSA product for network design of both AUTOSAR-based and non-AUTOSAR Electronic Control Units (ECUs).
5th February 2015

Evolving design automation in the automotive industry

The use of design automation is evolving to provide greater productivity in the automotive industry. By Sjon Moore, Mentor Graphics.
16th January 2015

Mentor to acquire XSe

Mentor to acquire XSe
To address the design challenges of integrated ADAS, driver information and infotainment domains, Mentor Graphics Corporation has acquired XS Embedded (XSe). XSe brings an approach to accelerate system design and verification by providing automotive-grade hardware and software to reduce the time to SOP.
9th July 2014

ATP provides GENIVI compliant solution for Automotive Tier One suppliers

Designed for Linux based IVI system development, Mentor Graphics has announced the latest version of their GENIVI 5.0 compliant Automotive Technology Platform (ATP).   
15th January 2014

Vehicle electrical system software updated

Supporting the S1000D documentation standard, the latest Capital suite software release has been announced by Mentor Graphics. By using the Capital Publisher tool, users can automatically generate S1000D-compliant information packages directly from their electrical design data. This significantly reduces the costs and lead times associated with technical documentation creation.
30th December 2013

New Mentor Embedded Hypervisor for IVI systems

The new Mentor Embedded Hypervisor product for in-vehicle infotainment systems, telematics, ADAS and instrumentation has been announced today by Mentor Graphics. The Mentor Embedded Hypervisor is a small footprint Type 1 hypervisor developed specifically for embedded applications and intelligent connected devices.
28th October 2013


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi