Companies

CETECOM GmbH

CETECOM GmbH Articles

Displaying 1 - 20 of 40
Analysis
8th September 2017
CETECOM joins 5G Automotive Association

In order to evolve, test and promote communications solutions for connected mobility, the 5G Automotive Association (5GAA) was formed in 2016. The 5GAA pursues the goal to develop, test and promote communications solutions, initiate the standardisation of next-gen mobile networks and accelerate their commercial availability and global market penetration to address society’s connected mobility and road safety needs.

Communications
25th July 2017
CETECOM introduces Bluetooth testing in Germany

The German Accreditation Body (DAkkS) has officially accredited CETECOM to carry out Bluetooth tests our location in Essen, Germany. With this new accreditation, CETECOM is expanding its testing capacities in the field of radio technologies in order to provide our customers with test and certification services from a single source. The expansion of our services covers the following scopes:

Analysis
13th June 2017
CETECOM joins LNI 4.0 lab network

As an official member and test centre of the LNI 4.0 network, CETECOM will help German SMEs in the use and development of wireless technologies in the industrial environment.

Test & Measurement
15th May 2017
Testing products comply with EMC Standard IEC 60601-1-2

CETECOM has expanded its service portfolio for testing and certification of medical technology products. After a successful audit by the ZLG (Zentralstelle der Länder für Gesundheitsschutz), CETECOM is now offering test services for the fourth edition of the EMC-Directive IEC 60601-1-2. The tests according to the EMC standard IEC 60601-1-2, 4th edition are compulsory from 31st December 2017.

Analysis
4th April 2017
Whitepaper gives insights to where products are affected

  A new whitepaper has been written by CETECOM; ‘Radio Equipment Directive - The new radio equipment directive in detail’, which aims to provide insights, which products are affected by the directive and which potential ways lead to conformity.

Communications
3rd April 2017
RED: the latest radio equipment directive in detail

The CETECOM whitepaper provides insights about the RED, which products are affected by the directive and which potential ways lead to conformity. The new Radio Equipment Directive 2014/53/EU (RED) forces that all items of equipment with the directives scope which need to be placed on the European market must follow one of the new RED Conformity Assessment Procedures.

Analysis
9th February 2017
CETECOM becomes the Wireless Power Consortium's validation lab

CETECOM has become the exclusive laboratory for validation of Qi test tools so they meet the requirements for use during WPC’s Qi product certification procedures.

Analysis
20th June 2016
Wired to radio project recruits new supporter

“Reliable Industrial Communication Over the Air” (RelCOvAir), a project which works on replacing wired connections with radios and providing reliable over the air connections for advanced manufacturing and processing systems for the near future of Industry 4.0. is being supported by CETECOM.

Analysis
17th May 2016
California test lab gets EMVCo test accreditation

The CETECOM Silicon Valley laboratory in Milpitas, California is now accredited by EMVCo to provide EMVCo Terminal Contactless Level 1 testing and certification services. The laboratory is the first in the US to provide this service. This strategic addition means no delays based on time difference issues, onsite debugging and troubleshooting without intercontinental travel expenses and dedicated project managers

Test & Measurement
23rd February 2016
CETECOM launches the Open Lab Alliance

On February 12, the Open Lab Alliance (OLA) opened its doors with a grand opening at the CETECOM laboratory in Milpitas, California. The OLA provides real world in-lab test scenarios necessary for developing connected vehicle subsystems and applications. It is hosted by a highly accredited test laboratory and is comprised of industry-leading test and measurement companies, roadside unit (RSU) suppliers, and simulation system tool providers that d...

Analysis
23rd February 2016
CETECOM earns new GlobalPlatform accreditation

CETECOM, the premiere wireless test and certification lab, has been accredited by GlobalPlatform as one of the first laboratories globally to perform tests according to the eUICC v2.1 Compliance Test Suite v1.0.

Test & Measurement
5th February 2016
The road to market for radio & telecomms products

The road to market for radio and telecomms products is defined by several questions related to conformity evaluation. What needs to be done before a product can be marketed? What are the different global conformity regulations? How can a Notified Body help to fasten the time to market?

Analysis
26th January 2016
Vodafone renews CETECOM OTA test accreditation

Vodafone renewed CETECOM’s accreditation for performing OTA testing for RF Performance V2.5 and LTE V2.0. With this accreditation renewal, CETECOM is still able to offer its customers competent performing tests according to Vodafone Specification for Terminals on Over the Air RF Performance V2.5 and Vodafone OTA RF Performance Requirements for LTE V2.0.

Test & Measurement
10th November 2015
Audio test cases validated

CETECOM has validated the test cases for 3GPP TS 26.132 / 26.131 for the newest release 12. Beside the GSM/UMTS bearer the test cases can now be processed officially also through an LTE carrier. The validation is based on the GCF Work Item GCF WI-221, “Voice over LTE (VoLTE) Quality and these test cases are now mandatory for devices, which support release 12 and wideband.

Analysis
24th August 2015
CETECOM wins Wi-Fi Passpoint test certification

The Wi-Fi Alliance has authorised CETECOM to perform Wi-Fi CERTIFIED Passpoint (Release 2) certification testing. CETECOM’s Silicon Valley facility now handles 17 certification programs - more than any other lab in the United States.

Analysis
5th August 2015
CETECOM joins OmniAir Consortium

CETECOM has joined the OmniAir Consortium connected vehicle association. In addition to certifying devices for 5.9GHz Dedicated Short-Range Communications (DSRC), CETECOM will also work with other OmniAir members to enhance in-vehicle application usability and certification standards.

Test & Measurement
21st July 2015
Wi-Fi Alliance partner named as test lab for Wi-Fi Aware

The Wi-Fi Alliance has launched the Wi-Fi CERTIFIED Wi-Fi Aware certification program, offering an exciting new capability of Wi-Fi which enables power-efficient discovery of nearby devices, applications, and information before making a Wi-Fi connection. Wi-Fi Aware is designed to work well in crowded environments and indoors, and to minimise power consumption. The “neighbour awareness” technology behind Wi-Fi Aware operates continuou...

Test & Measurement
15th January 2015
Test capacity expanded to service mobile coms standards

CETECOM has increased testing capacity to service the growing demand for mobile communications (GSM, W-CDMA and LTE). CETECOM is an accredited laboratory (ATL) for all of these technical standards in North America, Europe and Asia.

Analysis
25th November 2014
CETECOM earns OTA accreditation from Orange

CETECOM earns accreditation from carrier Orange for OTA (Over The Air) radiated performance and SAR and becomes first laboratory to be accredited in Europe.

Analysis
24th November 2014
V2X services established in cross-border ITS corridor

With the help of CETECOM and other parties from Germany, Austria and the Netherlands, the Federal Highway Research Institute will be involved in the initiative ‘Cooperative ITS Corridor (C-ITS Corridor)’ to establish co-operative systems for road traffic.

First Previous Page 1 of 2 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier