Analog Devices

Address:
No 3 Horizon Business Village
1 Brooklands Road
Weybridge
Surrey,

KT13 0TJ
United Kingdom

Phone: (44 1932) 358530

Fax: (44 1932) 358555

Web: www.analog.com

We enable our customers to interpret the world around us by intelligently bridging the physical and digital with unmatched technologies that sense, measure and connect.


Analog Devices articles

Displaying 21 - 40 of 42

Multicore SHARC processors deliver 24GFLOPS under 2W

Multicore SHARC processors deliver 24GFLOPS under 2W
  Delivering peak performance greater than 24GFLOPS using two enhanced SHARC+ cores and advanced DSP accelerators (FFT, FIR, IIR), Analog Devices has announced eight SHARC processors as part of a new, high-performance, power-efficient, real-time series.
16th June 2015

2.6GHz ADC is optimised for aerospace & defence

2.6GHz ADC is optimised for aerospace & defence
Analog Devices has introduced a 2.6GHz ADC, engineered to address the high-bandwidth and dynamic-range needs of aerospace and defence applications. The 12-bit AD9625BBP-2.6 is optimised to match the frequency planning and signal sensitivity requirements of advanced electronic surveillance and counter-measure applications, such as radar systems, secure communications networks and electronic signals monitoring.
22nd May 2015

Automotive audio bus enables transceiver to deliver 50Mb/s

Automotive audio bus enables transceiver to deliver 50Mb/s
Capable of distributing audio and control data together with clock and power over a single, unshielded twisted-pair wire, a digital audio bus technology has been introduced by Analog Devices. Providing improved vehicle fuel efficiency while delivering high-fidelity audio, the Automotive Audio Bus (A²B) reduces the weight of existing cable harnesses.
23rd October 2014


SigmaDSP processor improves audio performance

SigmaDSP processor improves audio performance
Adding an audio-centric device to the company's SigmaDSP processor line, the ADAU1452 from Analog Devices greatly exceeds the signal processing capabilities of earlier SigmaDSP devices. Executing up to three times more audio processing algorithms than its predecessors, hardware and software updates enable the processor to give system designers the flexibility to improve the audio performance of their products.
10th January 2014

Audi Group and Analog Devices to Collaborate on Automotive Innovations

Analog Devices Inc has been selected by Audi to collaborate strategically within its Progressive Semiconductor Program (PSCP). PSCP increases engagement between Audi and selected semiconductor suppliers to enhance the value they bring to the functionality and reliability of future cars.
6th June 2013

iCoupler Digital Isolators Meet Strict HEV/EV Requirements

Hybrid and full electric vehicles demand greater quality, reliability and robustness. iCoupler automotive digital isolators undergo extra qualification, additional inspections and more test coverage to satisfy the industry's strict requirements.
19th October 2012

Analog Devices’ Video Amplifiers Integrate Short-to-Battery Protection and Fault Detection for Automotive Video Applications

Analog Devices’ Video Amplifiers Integrate Short-to-Battery Protection and Fault Detection for Automotive Video Applications
Analog Devices, Inc today introduced a series of high-speed video amplifiers that integrate short-to-battery protection and fault detection for analog video systems in automotive safety and infotainment applications. Housed in 3mm x 3mm packages, ADI’s new integrated video amplifiers reduce board space by at least 80 percent compared to fully discrete solutions and are ideal for space-constrained applications, such as rear-view cameras. The ADA4830-1 (single-channel) and ADA4830-2 (dual-channel) video difference amplifiers, and ADA4432-1 (single-ended output) and ADA4433-1 (differential output) analog video filter amplifiers, provide designers with a complete chipset for transporting analog video signals over shielded and unshielded twisted pair cables. The video amplifiers also can be used independently to provide receiver (ADA4830-1/2) and transmitter (ADA4432-1/33-1) functions as part of a video signal chain. All of these new amplifiers feature integrated short-to-battery protection up to 18 V, short-to-ground protection, fault detection, wide common-mode voltage ranges and robust ESD (electro-static discharge) performance.
11th June 2012

Voltage References Combine Ultra-Low Noise, High Accuracy And Value For Precision Applications

Analog Devices, Inc today introduced a series of voltage references offering the industry’s best combination of noise performance, initial output voltage accuracy, low temperature coefficient (TC), and excellent long-term stability at unmatched price points. The new ADR45xx series (ADR4520, ADR4525, ADR4530, ADR4533, ADR4540 and ADR4550) of voltage references are specifically suited for high-resolution data converters and precision applications in automotive battery monitoring.
1st May 2012

Precision ±1.7 g, ±5 g, ±18 g Dual-Axis iMEMS Accelerometer

The ADXL103/ADXL203 are high precision, low power, complete single- and dual-axis accelerometers with signal conditioned voltage outputs, all on a single, monolithic IC. The ADXL103/ADXL203 measure acceleration with a full-scale range of ±1.7 g, ±5 g, ±18 g. The ADXL103/ADXL203 can measure both dynamic acceleration (for example, vibration) and static acceleration (for example, gravity).
6th February 2012

±250°/sec Yaw Rate Gyroscope

The ADXRS622 is a complete angular rate sensor (gyroscope) that uses the Analog Devices, Inc., surface-micromachining process to make a functionally complete and low cost angular rate sensor, integrated with all of the required electronics on one chip. The manufacturing technique for this device is the same high volume BiMOS process used for high reliability automotive airbag accelerometers.
6th February 2012

Small, Low Power, Dual Axis High-g iMEMS Accelerometer With Analog Output

The ADXL278 is a low power, complete, dual-axis accelerometer with signal conditioned voltage outputs that are on a single monolithic IC. This product measures acceleration with a full-scale range of (X-axis/Y-axis) ±35 g/±35 g, ±50 g/ ±50 g, or ±70 g/±35 g (minimum). The ADXL278 can also measure both dynamic acceleration (vibration) and static acceleration (gravity).
6th February 2012

Configurable, High-g, iMEMS Accelerometer

The ADXL180 iMEMS accelerometer is a configurable, single axis, integrated satellite sensor that enables low cost solutions for front and side impact airbag applications. Acceleration data is sent to the control module via a digital 2-wire current loop interface bus. The communication protocol is programmable for compatibility with various automotive interface bus standards.
6th February 2012

Single-Axis, High-g, iMEMS Accelerometers

Single-Axis, High-g, iMEMS Accelerometers
The ADXL78 is a low power, complete single-axis accelerometer with signal conditioned voltage outputs that are on a single monolithic IC. This product measures acceleration with a full-scale range of ±35 g, ±50 g, or ±70 g (minimum). It can also measure both dynamic acceleration (vibration) and static acceleration (gravity).
6th February 2012

Analog Devices' 16-Channel Audio D/A Converter Provides High-Performance Audio At Lower Power For Automotive Applications

Analog Devices, Inc introduced a 16-channel audio D/A converter today capable of improving audio system performance and reducing power consumption for professional, “prosumer” and automotive audio equipment applications.
30th November 2011

Industry-leading Blackfin Embedded Processor Now Available For Under $2

Continuing to offer designers low-cost and high-performance digital signal processing options, Analog Devices, Inc. today introduced a 200-MHz version of its ADSP-BF592 Blackfin embedded processor that delivers 400-MMAC performance for just $1.99 each (in 1,000-unit quantities). The lower-cost 200 MHz version achieves a BDTImark2000 performance score of 1120 and a BDTImark2000/$ performance/cost score of 562 compared with ADI's 400 MHz version’s BDTImark2000 score of 2240 and BDTImark2000/$ score of 747—which was the highest performance/cost score ever recorded by DSP benchmarking firm BDTI.
7th September 2011

Fail-safe Imems Gyroscope Provides Unmatched Shock And Vibration Immunity For Automotive Applications

For automotive electronic stability control, rollover detection, and pitch detection applications, Analog Devices, Inc. today introduced the ADXRS800 iMEMS gyroscope, featuring a patented differential quad-beam architecture designed to minimize the influence of linear shock and vibration. Qualified for automotive safety applications, the ADXRS800 is the most stable, vibration-immune automotive-grade gyro available while a continuous electro-mechanical self-test feature ensures the integrity of the gyro output signal.
7th September 2011

Analog Devices RMS-To-DC Converter ensures accuracy and Best Converter Ensures Accuracy And Best-In-Class Dynamic Range

Analog Devices, Inc unveiled an integrated true RMS-to-DC converter that offers a best-in-class 100 µV to 3 V of usable dynamic range and the ability to measure extremely low signal levels with high accuracy and no drop in settling time.
22nd August 2011

Bosch Presents Analog Devices With Prestigious Supplier Award For 2009-2010

Bosch Presents Analog Devices With Prestigious Supplier Award For 2009-2010
Analog Devices, Inc has received the 2009-2010 Bosch Supplier Award. ADI received the award for superior service in the electronics category (ASIC and ASSP), in particular for supplying application-specific analog and mixed-signal products designed to meet the rigorous quality and reliability standards of the automotive industry.
12th August 2011

Advanced Automotive Radar Helps Car Makers Increase Driver Safety Through Intelligent Vehicle Design

Advanced Automotive Radar Helps Car Makers Increase Driver Safety Through Intelligent Vehicle Design
Automotive safety is evolving from passive systems such as seat belts, airbags and crash detection to active sensing networks capable of collision avoidance and accident prevention. Radar is an especially promising active safety improvement and has the potential to significantly reduce the number and severity of distracted driving accidents. Analog Devices, Inc whose integrated inertial sensing iMEMS® technology helped make airbags a standard automotive safety feature over 15 years ago, is introducing an affordable, high-performance, radar AFE (analog front-end) IC today
3rd August 2011

Data and Power Isolation Circuits Receive Automotive Qualification For Hybrid-Electric Vehicle Battery Management

Data and Power Isolation Circuits Receive Automotive Qualification For Hybrid-Electric Vehicle Battery Management
The growing popularity of electric and hybrid-electric vehicles (HEVs) is placing new emphasis on the need for battery management to monitor voltage levels and provide car makers with the means to reduce battery weight, size and cost. Because HEV batteries operate at high voltages of up to 600 V, isolation is required for safe and reliable operation. Analog Devices is addressing these needs by expanding its portfolio of AEC-Q100 products with the introduction today of quad-channel digital isolators with integrated, isolated power.
24th January 2011


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EVS32
19th May 2019
France EUREXPO LYON
ELIV 2019
16th October 2019
Germany Bonn World Conference Center