VME64x custom 6U extender card enables military applications

18th February 2016
Posted By : Nat Bowers
VME64x custom 6U extender card enables military applications

Verotec has developed a custom 280mm long 6U VME64x extender card for a leading embedded systems company to facilitate testing and debugging of their cards used in a ruggedised military application. The custom extender provides an interface between the standard DIN41612 connectors used in the VME64x-based test system and the high density 160-way female connectors used to connect to the board under test.

Each signal track in the 10 layer stripline extender board is protected from crosstalk from adjacent lines with ground track screening and fitted with jumper links to allow interrogation and an additional connector for a logic analyser.

The 2.54mm pitch high density female connector has round sockets that need a high insertion force to mate them fully home, a requirement driven by the application as the installed equipment is liable to be subject to high g forces and shock and vibration. To ensure that a good connection is made when the card is plugged the extender connectors are mounted to a keyed framework that ensures correct alignment and prevents distortion and possible damage during insertion. To interconnect between the 160-way female connector and the extender board required a custom right angle DIN41612 female connector in the extender that in turn interfaces with the high availability female connector that connects with the board under test.

Tim Armstrong, Commercial Director, Verotec, commented: “This project is a good example of our ability to modify one of our standard products, a VME64x extender, to create a cost-effective, application-specific solution in a short timescale.”

You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Mobile World Congress 2018
26th February 2018
Spain Barcelona
embedded world 2018
27th February 2018
Germany Nuremberg
Industry 4.0 Summit 2018
28th February 2018
United Kingdom Manchester
Factories of the Future Expo 2018
28th February 2018
United Kingdom Manchester
Power supply design seminar 2018
1st March 2018
United Kingdom