TE Connectivity’s High-Current Reflowable Thermal Protection Device Helps Meet Demanding Reliability Requirements of Automotive Electronics

12th November 2014
Posted By : Jacqueline Regnier
TE Connectivity’s High-Current Reflowable Thermal Protection Device Helps Meet Demanding Reliability Requirements of Automotive Electronics

To address the growing need to increase reliability and safety in extremely harsh automotive environments, TE Connectivity’s Circuit Protection business unit (TE Circuit Protection) has introduced a High-Current Reflowable Thermal Protection (HCRTP) device. Specifically suited to high-power, high-current automotive applications – such as ABS modules, glow plugs and engine cooling fans – the robust HCRTP device (model: RTP200HR010SA) can withstand hold currents of up to 90A at room temperature (23ºC) and 45A at 140ºC. In addition to helping automotive designers comply with stringent AECQ automotive standards (including the AECQ vibration test), the surface-mountable HCRTP device speeds installation.

The HCRTP device builds on TE Circuit Protection’s RTP technology. This technology helps protect electronic systems in the event that power FETs, capacitors or other power components fail due to increased resistance, thus causing thermal runaway. The innovative technology utilizes a one-time electrical activation process to become thermally sensitive. Prior to activation, the HCRTP device can withstand lead (Pb)-free solder reflow processes up to 260°C without opening. But following installation, the one-time electrical arming process initiates a lower thermal threshold of 210°C. After arming, which is typically done at end of line testing after reflow, the device will open when the critical junction exceeds the 210°C open temperature.

Available in a low-profile (3.7mm max.) package, the HCRTP device can be installed using industry-standard, Pb-free, SMD (surface mount device) assembly and reflow processes. In comparison, radial-leaded thermal fuses must be installed after reflow. The HCRTP device therefore enables cost-effective and simple installation while also optimizing thermal coupling with the printed circuit board, or PCB.

“With the increased power of automotive electronics, thermal protection devices must handle higher currents to maintain reliability,” said Faraz Hasan, Sr. Global Strategic Automotive Marketing Manager for TE Circuit Protection. “For example, an integrated ABS module combining ABS, stability control and an electronic parking brake generates a significant amount of heat at the input connector or power MOSFET if a failure or fault condition occurs. In the event of a component failure, where the currents are extremely high, the high-current-withstand capability of the HCRTP device can help prevent a potentially damaging event caused by thermal runaway. This is a key consideration for automotive electronics designers who need to comply with AECQ tests.”

Price:           Available upon request

Availability:   Samples available now

Delivery:     12 weeks, ARO


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

act! 2017
28th September 2017
Germany NHOW Berlin
ELIV 2017
18th October 2017
Germany Bonn World Conference Center
TU-Automotive Europe 2017
6th November 2017
Germany Munich
Smart Mobility Executive Forum
12th February 2018
Germany Berlin