100W encapsulated DC/DC converters for RIA12 railway applications

7th September 2017
Posted By : Anna Flockett
100W encapsulated DC/DC converters for RIA12 railway applications

The PDR 100R series has been added to ABSOPULSE Electronics’ line of fully encapsulated RIA12 DC/DC converters for railway applications. With an input voltage surge withstand capacity 3.5 times the nominal input voltage for 20ms, the converters meet RIA12 requirements for protection of traction and rolling stock equipment from transients and surges in DC control systems.

They have heavy filtering on the input and output and comply with EN50121-3-2. Electronic protection includes 3000Vdc input-output isolation, overload protection, thermal protection and current limiting. The units comply with EN50155.

The 100W converters provide an output of 12V, 24, 48 or 110VDC. They accept input voltages of 24VDC nominal (15-34V range), 48VDC (29-67V), 72VDC (43-101V) or 110VDC (66-154Vdc). Custom input and output voltages are available. Efficiency depends on input/output configuration and is typically is 85% at full load.

The PDR 100R-P99 railway converters are fully encapsulated with a thermally conductive MIL-grade silicon rubber compound with a UL94V-0 flammability rating. Encapsulation ensures protection from high levels of shock and vibration, moisture, dust and other contaminants. Conduction cooling via base plate to customer heat-sink or chassis and encapsulation enable a -40 to 70°C cold plate temperature range without de-rating. The converters are housed in a compact chassis measuring 81x66x156mm.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

act! 2017
28th September 2017
Germany NHOW Berlin
ELIV 2017
18th October 2017
Germany Bonn World Conference Center
TU-Automotive Europe 2017
6th November 2017
Germany Munich
Smart Mobility Executive Forum
12th February 2018
Germany Berlin